Starting Wps From The Tyros5; Manually Setting The Access Point Mode - Yamaha Tyros5 Reference Manual

Starting WPS from the Tyros5

Press and hold the button on the bundled USB Wireless LAN Adaptor until a WPS-related message appears on the
Tyros5 display.

Manually Setting the Access Point Mode

When an available access point cannot be found, you can connect the Tyros5 and the smart device directly.
1
Press the [FUNCTION] button  [J] (WIRELESS LAN)  [1 ] or [2 ] (MODE
CHANGE).
2
Press the [G] (YES) button.
This calls up the network information on of the Tyros5.
3
If necessary, press the [I] (DETAIL) button and enter the SSID, Security and Password
settings.
Use the [B] (SSID) button, [C] (SECURITY) button and [D] (PASSWORD) button to enter each setting.
4
Press [7 ] or [8 ] (SAVE) button and follow the onscreen instructions.
The Tyros5 is now available as an access point.
146 Tyros5 Reference Manual
[WPS] button
To change to the Infrastructure Mode.
follow Steps 1 and 2 again.
NOTE