Peripheral Devices - Sharp MX-4500N User Manual

4

PERIPHERAL DEVICES

This chapter describes the peripheral devices that can be used with the machine and explains how to use the finisher
and saddle stitch finisher.
PERIPHERAL DEVICES
Peripheral devices can be installed on the machine to increase its range of functionality.
The peripheral devices are generally optional, however, some models include certain peripheral devices as standard equipment.
Product name
Original cover
Reversing single pass feeder
(Automatic document feeder)
Stand/1x500 sheet paper drawer
Stand/2x500 sheet paper drawer
Large capacity tray
Exit tray unit
(Right tray)
Finisher
Punch module
Saddle stitch finisher
Paper pass unit
Product number
1
MX-VRX1* This holds down the original.
This automatically turns the original over to enable scanning of
1
MX-RPX1*
both sides.
2
MX-DEX1*
3
MX-DEX3*
Additional tray. A maximum 500 sheets of paper can be loaded
in each tray.
2
MX-DEX2*
3
MX-DEX4*
Additional tray. A maximum of 3500 sheets of paper can be
loaded in the tray.
MX-LCX1
To install the tray, a stand/1 x 500 sheet paper drawer or
stand/2 x 500 sheet paper drawer is required.
2
MX-TRX1*
This can be added to the right side of the machine.
3
MX-TRX2*
Output device that enables the use of the staple function and
MX-FNX1
offset function.
MX-PNX1A
MX-PNX1B
Punches holes in copies and other output. Requires a finisher.
MX-PNX1C
MX-PNX1D
Output device that enables use of the staple function, offset
function and pamphlet copy function.
MX-FNX2
To install the saddle stitch finisher, a stand/1 x 500 sheet paper
drawer or stand/2 x 500 sheet paper drawer is required.
MX-RBX1 Required when a saddle stitch finisher is installed.
38
(As of November, 2005)
Description