User Authentication; Authentication By User Number - Sharp MX-4500N User Manual

USER AUTHENTICATION

When the administrator of the machine has enabled user authentication, one of two screens shown below will appear. If
either screen appears, enter the user number or login name and password that you received from the administrator.
Enter your user number.
When controlled by user number

AUTHENTICATION BY USER NUMBER

The following procedure is used to log in using a user number received from the administrator of the machine.
Enter your user number.
1
Enter your user number.
2
When the user number is an 8-digit number, this step is not necessary. (Login takes place automatically after the user
number is entered.)
OK
Admin Login
Enter your user number (5 to 8 digits)
with the numeric keys.
Each entered digit will be displayed as "
Touch the [OK] key.
After the entered user number is authenticated, the user count
OK
screen will appear briefly.
Admin Login
The number of pages remaining appears when page limits
have been set in "Pages Limit Group Registration" in the
system settings (administrator). (The remaining number of
pages that the user can use in each mode (copy, scan, etc.)
appears.) The amount of time that this screen appears can be
changed using "Message Time Setting" in the system settings
(administrator).
15
Please enter your login name /
password.
User Authentication
Login Name
User Name
Password
Login Locally
Auth to:
When controlled by login name and password
(Different items will appear in the screen when LDAP
authentication is used.)
Usage status : used/remaining pages
Black-white :87,654,321/12,345,678
Full colour :87,654,321/12,345,678
2-colour :87,654,321/12,345,678
Single colour :87,654,321/12,345,678
OK
".