Advertisement
Cool -Touch Electric Skillet
IMPORTANT SAFEGUARDS
In order to prevent the risk of fire, electric shock, burns or other injury or
damage, follow these instructions carefully. When using electrical appliances,
basic safety precautions should always be followed including the following:
1. READ ALL INSTRUCTIONS
BEFORE USING.
2. Do not touch hot surfaces. Use
Handles/Legs Assembly.
3. To protect against electrical shock,
do not immerse Temperature
Control Probe, Cord or plugs in
water or other liquids.
4. Close supervision is necessary when
any appliance is used by or near
children.
5. Unplug from outlet when not in use
and before cleaning. Allow to cool
before putting on or taking off
parts, and before cleaning the
appliance.
6. Do not operate any appliance with a
damaged Cord or plug or after the
appliance malfunctions or has been
damaged in any manner. Call
Customer Service(see warranty) to
return for examination, repair, or
adjustment.
7. The use of accessory attachments
not recommended by manufacturer
may cause injuries.
SAVE THESE INSTRUCTIONS!
Consumer Safety Information
THIS APPLIANCE IS INTENDED FOR HOUSEHOLD USE ONLY.
This appliance has a polarized plug
(one blade is wider than the other).
To reduce the risk of electric shock,
this plug is intended to fit into a
polarized outlet only one way. If the
plug does not fit fully into the outlet,
reverse the plug. If it still does not fit,
contact a qualified electrician. Do not
2
8. Do not use outdoors.
9. Do not let Cord hang over edge of
table or counter, or touch heated
surfaces.
10. Do not place on or near a hot gas
or electric burner, or in a heated
oven.
11. Extreme caution must be used
when moving appliance containing
hot oil or other hot liquids.
12. Always attach Temperature Contol
Probe to appliance first, then plug
Cord into the wall outlet. To
disconnect, turn Temperature
Control Dial to OFF, then remove
plug from wall outlet.
13. Do not use appliance for other than
intended use.
14. Be sure Lid Handle is assembled
and fastened properly. See assembly
instructions on page 4, "How to
Assemble Your Electric Skillet".
attempt to modify the plug in any way.
CAUTION: To reduce the risk of electric
shock, do not immerse the Electric Skillet
in water with the TEMPERATURE
CONTROL PROBE attached. No user
serviceable parts inside. Do not attempt to
service this product.
A short power-supply cord is provided
to reduce the hazards resulting from
entanglement or tripping over a longer
cord. AN EXTENSION CORD MAY BE
USED WITH CARE; HOWEVER, THE
MARKED ELECTRICAL RATING SHOULD
BE AT LEAST AS GREAT AS THE
ELECTRICAL RATING OF THE SKILLET. The
extension cord should not be allowed
to drape over the counter or tabletop
where it can be pulled on by children
or unintentionally tripped over.
Know Your Electric Skillet
Parts and Features
1
Lid
2
Lid Handle
3
Transparent Glass Window
4
Steam Vent
5
Lid Rest latch
6
Probe Guard
7
Temperature Control Indicator
8
Temperature Control Dial
9
Cord
10
Temperature Control Probe
11
Handles / Legs Assembly
12
Cool-Touch Base
13
Non-Stick Surface
KEEP WARM SETTING: The Temperature
Control Probe has a Keep Warm range
setting of approximately 160° to 180° F.
The indicator light will cycle ON and
OFF when this setting is maintaining
the desired temperature. NOTE: During
initial use of this appliance, some slight
smoke and/or odor may be detected. This
is normal with many heating appliances
and will not recur after a few uses. Only
use with Temperature Control Probe
number MPTC-9 or MPTC-9mp.
2
3
1
4
13
11
12
5
7
6
8
10
9
3
Advertisement
