Control Settings - GE GSD800 Owner's Manual

Control Settings

Cycles
1
POTSCRUBBER
NORMAL WASH For loads of everyday dishes, glasses and
LIGHT WASH/
WATER SAVER
Make sure the Dial is at the OFF position.
Latch the door.
NOTE: The lights over the pads (on some models)
come on when pressed, to indicate the cycle/option
that has been selected. Press pad firmly until lights
come on. These lights remain on while the door
is latched.
Energy Options
2
TEMP BOOST ON/ Provides extra heat for best performance. It is
TEMP BOOST
TEMP BOOST OFF Turns off TEMP BOOST ON.
HEATED DRY ON/
HEATED DRY
HEATED DRY
OFF
ENERGY SAVER
Start
3
Slowly turn the Dial to the START position. Don't turn it
past the START position, or you could accidentally miss a
rinse. There is a time delay between start-up and water
fill so you will not hear any wash action right away.
For heavily soiled dishes or cookware with
dried-on or baked-on soils. Everyday dishes may
be included. This cycle will not remove burned-on
foods.
cookware with medium soils. NOTE: Many dishes
have lighter soil than normal. Choosing a cycle
other than NORMAL WASH will save energy
and water.
For dishes with light soils.
used best with heavily-soiled dishes.
Turns the drying heater on for fast drying. This
cycle will extend the time to your wash cycle.
Shuts off the drying heat options. Dishes air dry
naturally and energy is saved.
Turns off all OPTIONS.
9