Horizontal Banding; Vertical Banding Or Misalignment - Epson NPD4736-00 EN User Manual

User's Guide
Good sample
"Vertical banding or misalignment" on
&
page 88

Horizontal banding

❏ Make sure the printable side (the whiter side) of the paper is face up in the rear paper feed.
❏ Run the Head Cleaning utility to clear any clogged ink nozzles.
"Cleaning the Print Head" on page 67
&
❏ Make sure you use ink bottles with the correct part number for this product.
"Ink Bottles" on page 102
&
❏ Try to use genuine Epson ink bottles.
❏ Make sure the paper type selected in the LCD menu or printer driver is appropriate for the type of paper loaded in
the product.
"Selecting Paper" on page 17
&
❏ If banding appears at intervals of 2.5 cm, run the Print Head Alignment utility.
"Aligning the Print Head" on page 68
&
❏ If a moire (cross-hatch) pattern appears on your copy, change the Reduce/Enlarge setting in the LCD menu or
shift the position of your original.
❏ If there is problem with copy quality, clean the surface of the scanner glass.
"Cleaning the exterior of the product" on page 73
&

Vertical banding or misalignment

❏ Make sure the printable side (the whiter side) of the paper is face up in the rear paper feed.
❏ Run the Head Cleaning utility to clear any clogged ink nozzles.
"Cleaning the Print Head" on page 67
&
Troubleshooting for Printing/Copying
"Horizontal banding" on page 88
&
"Printout is blurry, smeared, or scuffed or ink
&
supply is poor" on page 89
88