Periodic Inspection Of The Breaker; Checking The Breaker - Canon imageRUNNER ADVANCE C9070PRO User Manual

Periodic Inspection of the Breaker

This machine has a breaker that detects excess current or leakage current. Make sure to test the breaker once or twice a
month using the following procedure.
•
Make sure that the main power is turned OFF, before inspecting the breaker.
•
If a malfunction occurs after an inspection, contact your local authorized Canon dealer.

Checking the Breaker

1
Push the test button on the rear of the machine with the tip of a ball-point pen, or a similar
object .
Briefly push the test button.
•
The breaker is located on the rear of the machine.
•
For more information on the location of the breaker, see e-Manual > Before You Start Using This Machine.
2
Confirm that the breaker lever is switched to the OFF (" " side) position .
•
Do not use the test button to turn the power ON and OFF.
•
If the breaker lever does not switch to the OFF (" " side) position, repeat step 1.
•
If the breaker lever does not switch to the OFF (" " side) position, despite carrying out the above procedure two or three times,
contact your local authorized Canon dealer.
ON
( I side)
OFF
( side)
xxv