Handling - Canon imageRUNNER ADVANCE C9070PRO User Manual

Handling

•
Do not attempt to disassemble or modify the machine . There are high-temperature and high-voltage components inside the
machine which may result in a fire or electrical shock .
•
If the machine makes strange noises, or gives off smoke, heat, or strange smells, immediately turn OFF the main power
switch, and disconnect the power cord from the power outlet . Then, contact your local authorized Canon dealer . Continued
use of the machine in this condition may result in a fire or electrical shock .
•
Do not use highly flammable sprays near the machine . If gas from these sprays comes into contact with the electrical
components inside the machine, it may result in a fire or electrical shock .
•
To avoid damage to the power cord and creating a fire hazard, always turn OFF the main power switch, and unplug the
interface cable when moving the machine . Otherwise, the power cord or interface cable may be damaged, resulting in a fire
or electrical shock .
•
Make sure that the power plug is firmly inserted into the power outlet if the machine was moved . Do not use the machine
while the connection is loose, as doing so may cause a fire .
•
Do not drop paper clips, staples, or other metal objects inside the machine . Also, do not spill water, liquids, or flammable
substances (alcohol, benzene, paint thinner, etc .) inside the machine . If these items come into contact with a high-voltage
area inside the machine, it may result in a fire or electrical shock . If these items are dropped or spilled inside the machine,
immediately turn OFF the main power switch, and disconnect the power cord from the power outlet . Then, contact your local
authorized Canon dealer .
•
Do not use the product for uses other than as a colour digital multitasking machine .
•
Do not place heavy objects on the machine, as they may tip over or fall resulting in personal injury .
•
Close the feeder gently to avoid catching your hands, as this may result in personal injury .
•
Do not press down hard on the feeder when using the platen glass to make copies of thick books . Doing so may damage the
platen glass and result in personal injury .
•
Do not touch the finisher while the machine is printing, as this may result in personal injury .
•
Paper that has just been output from the machine may be hot . Be careful when removing or aligning paper from the output
tray . Touching paper right after it is output may result in low-temperature burns .
•
Turn OFF the control panel power switch for safety when the machine will not be used for a long period of time, such as
overnight . Also, turn OFF the main power switch, and disconnect the power cord for safety when the machine will not be used
for an extended period of time, such as during consecutive holidays .
•
Do not place your hands, hair, clothing, etc ., near the exit and feed rollers . Even if the machine is not in operation, your hands,
hair, or clothing may get caught in the rollers, which may result in personal injury or damage if the machine suddenly starts
printing .
•
Do not place your hands in the part of the tray where stapling is performed (near the rollers) when a finisher is attached,
as this may result in personal injury .
•
The laser beam can be harmful to human bodies . Since radiation emitted inside the product is completely confined within
protective housings and external covers, the laser beam cannot escape from the machine during any phase of user operation .
Staple Finisher-A1/
Booklet Finisher-A1
Staple Finisher-B1/
Booklet Finisher-B1
xxi