Verify The Cabling - NETGEAR N750 User Manual

Verify the Cabling

Verify that your router is cabled correctly by checking the router LEDs. Turn on the router by
pressing the On/Off button on the back.
• The Power LED lights amber when the router is turned on.
• The LAN port LEDs light green for each computer cabled to the router.
• The 2.4 GHz N/G-Band LED is lit, and the 5.0 GHz N-Band LED is lit.
• The Internet LED is lit. If it is not, make sure that the Ethernet cable is securely
attached to the router Internet port and the modem, and that the modem is powered on.
Verify that the LAN
an Ethernet cable.
N750 Wireless Dual Band Gigabit Router WNDR4300
LEDs (1 through 4) are lit for any computers cabled to the router by
Hardware Setup
14