Pppoe - NETGEAR N750 User Manual

N750 Wireless Dual Band Gigabit Router WNDR4300

PPPoE

In the IPv6 screen, when you select PPPoE from the drop-down list, the following screen
displays.
The following fields are included in this screen:
Login. This is usually the name that you use in your email address. For example, if your main
mail account is JerAB@ISP.com, then you would put JerAB in this field.
Some ISPs (like Mindspring, Earthlink, and T-DSL) require that you use your full email
address when you log in. If your ISP requires your full email address, type it in this field.
Password. Type the password that you use to log in to your ISP.
Service Name. If your ISP provided a service name, enter it here. Otherwise, you can leave
this field blank.
Connection Mode. This specifies when the router should establish the PPPoE connection.
Currently the connection mode is always on to provide a steady IPv6 connection. The router
never disconnects the connection, and in case the connection is broken (such as if the
modem is turned off), the router establishes the connection right after the PPPoE connection
is available.
The other settings are the same as Auto Detect mode. See IPv6 LAN Setup and IPv6
Filtering on page 108.
Advanced Settings
113