NETGEAR D6200 User Manual page 15

Table 1. Power On/Off LED
Icon LED Activity
Solid green
Solid red
Blinking red
Off
Table 2. DSL LED
Icon LED Activity
Solid green
Blinking green
Off
Table 3. Internet LED
Icon LED Activity
Solid green
Solid red
Blinking green
Off
D6200 WiFi DSL Modem Router
Description
Power is supplied to the router.
POST (power-on self-test) failure or a device malfunction occurred.
LED blinks momentarily when the Reset button on the back of the unit is
pressed for 6 seconds. The Power LED then blinks red three times when
the Reset button is released and then turns green as the gateway resets to
the factory defaults.
Power is not supplied to the router.
Description
You have an ADSL connection. In technical terms, the ADSL port is
synchronized with an ISP network-access device.
Indicates that the WiFi DSL modem router is negotiating the best possible
speed on the ADSL line.
The unit is off or has no ADSL connection.
Description
You have an Internet connection. If this connection is dropped due to an
idle time-out but the connection is still present, the LED stays green. If the
Internet connection is dropped for any other reason, the LED turns off.
The Internet (IP) connection failed. For troubleshooting information, see
Cannot Access the Internet
Data is being transmitted over the Internet connection.
No Internet connection is detected or the device is in bridge mode (an
external device handles the ISP connection).
Hardware Setup
15
on page 147.