Table of Contents
Advertisement
To set up a static route:
1.
Select ADVANCED > Advanced Setup > Static Routes.
2.
Click Add.
3.
In the Route Name field, type a name for this static route (for identification purposes only.)
4.
(Optional) Select the Private check box if you want to limit access to the LAN only.
If Private is selected, the static route is not reported in RIP.
5.
Select the Active check box.
6.
Type the IP address of the final destination.
7.
Type the IP subnet mask for this destination.
If the destination is a single host, type 255.255.255.255.
D6200 WiFi DSL Modem Router
Advanced Settings
127
Hide quick links:
Advertisement
Table of Contents
