Select one of the following 5 modes, as appropriate for your purpose.
• atw
: Select this when the color temperature is between 2,400˚K and 11,000˚K.
• outDoor : Select this when the color temperature is between 1,700˚K and
11,000˚K. (sodium light inclusion)
• inDoor : Select this when the color temperature is between 4,500˚K and 8,500˚K.
• manuaL : Select this to fine-tune White
Balance manually. Set White Balance first by
using the ATW or AWC mode. After that switch
to MANUAL mode, fine-tune the White Balance
and the Function Setup switch.
• awc ➞ Set : To find the optimal luminance
level for the current environment, point the
camera towards a sheet of white paper
and press the Function Setup switch. If the
environment changes, readjust it.
White Balance may not work properly under the following conditions. In this case select the AWC
`
J
mode.
-
When the ambient illumination of the subject is dim.
-
If the camera is directed towards a fluorescent light or is installed in a place where illumination
changes dramatically, the White Balance operation may become unstable.
WHITE BAL MANUAL SETUP
.... ....
RED
►
.... .... * .... .... 560
BLUE
RETURN
English _21
.... .... 552
*