Cisco UCS C24 Installation And Service Manual
  1. Manuals
  2. Brands
  3. Cisco Manuals
  4. Server
  5. UCS C24
  6. Installation and service manual

Cisco UCS C24 Installation And Service Manual

Hide thumbs Also See for UCS C24:
Table of Contents

Advertisement

Quick Links

Download this manual
Enlarged version
Cisco UCS C240 Server
Installation and Service Guide
Covers Server Generation M3
November 14, 2013
Americas Headquarters
Cisco Systems, Inc.
170 West Tasman Drive
San Jose, CA 95134-1706
USA
http://www.cisco.com
Tel: 408 526-4000
800 553-NETS (6387)
Fax: 408 527-0883
OL-25761-01
Text Part Number:

Advertisement

Table of Contents
loading

Related Manuals for Cisco UCS C24

Summary of Contents for Cisco UCS C24

  • Page 1 Cisco UCS C240 Server Installation and Service Guide Covers Server Generation M3 November 14, 2013 Americas Headquarters Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA 95134-1706 http://www.cisco.com Tel: 408 526-4000 800 553-NETS (6387) Fax: 408 527-0883 OL-25761-01 Text Part Number:...
  • Page 2 Cisco and/or its affiliates in the United States and certain other countries. Cisco and the Cisco Logo are trademarks of Cisco Systems, Inc. and/or its affiliates in the U.S. and other countries. A listing of Cisco's trademarks can be found at www.cisco.com/go/trademarks.

  • Page 3: Table Of Contents

    Service Headers and Jumpers 2-16 Header Locations on the Motherboard 2-16 Using the BIOS Recovery Header J2068 2-17 Procedure 1: Reboot With recovery.cap File 2-17 Procedure 2: Use Recovery Jumper and recovery.cap File 2-19 Cisco UCS C240 Server Installation and Service Guide OL-25761-01...
  • Page 4 Replacing a Mezzanine Card 3-36 Replacing a PCIe Riser 3-38 Replacing a PCIe Card 3-40 PCIe Slots 3-40 Replacing a PCIe Card 3-41 Special Considerations for Cisco UCS Virtual Interface Cards 3-43 Cisco UCS C240 Server Installation and Service Guide OL-25761-01...
  • Page 5 Contents Special Considerations for Cisco UCS Fusion ioDrive2 Storage Accelerator Cards 3-44 RAID Controller Card Cable Routing 3-44 Installing Multiple PCIe Cards and Resolving Limited Resources 3-45 Installing an NVIDIA GRID or Tesla GPU Card 3-47 Overview of Software Requirements...
  • Page 6 LFF 12-Drive Backplane With Expander C-23 Restoring RAID Configuration After Replacing a RAID Controller C-24 For More Information C-24 Installation for Cisco UCS Integration A P P E N D I X Cisco UCS C240 Server Installation and Service Guide OL-25761-01...

  • Page 7: Preface

    Preface This preface describes the audience, organization, and conventions of the Cisco UCS C240 Server Installation and Service Guide. It also provides information about how to obtain related documentation. Related Documentation The documentation set for the Cisco Unified Computing System (UCS) C-Series rack-mount servers is...

  • Page 8: Audience

    Preface Audience This guide is for experienced network administrators who configure and maintain Cisco servers. Documentation Feedback To provide technical feedback on this document, or to report an error or omission, please send your comments to ucs-docfeedback@external.cisco.com. We appreciate your feedback.
  • Page 9 å forhindre ulykker. Bruk nummeret i slutten av hver advarsel for å finne oversettelsen i de oversatte sikkerhetsadvarslene som fulgte med denne enheten. TA VARE PÅ DISSE INSTRUKSJONENE Cisco UCS C240 Server Installation and Service Guide OL-25761-01...
  • Page 10 Använd det nummer som finns i slutet av varje varning för att hitta dess översättning i de översatta säkerhetsvarningar som medföljer denna anordning. SPARA DESSA ANVISNINGAR Cisco UCS C240 Server Installation and Service Guide viii OL-25761-01...
  • Page 11 Brug erklæringsnummeret efter hver advarsel for at finde oversættelsen i de oversatte advarsler, der fulgte med denne enhed. GEM DISSE ANVISNINGER Cisco UCS C240 Server Installation and Service Guide OL-25761-01...
  • Page 12 Preface Cisco UCS C240 Server Installation and Service Guide OL-25761-01...

  • Page 13: Obtaining Documentation And Submitting A Service Request

    Obtaining Documentation and Submitting a Service Request For information on obtaining documentation, submitting a service request, and gathering additional information, see the monthly What’s New in Cisco Product Documentation, which also lists all new and revised Cisco technical documentation, at: http://www.cisco.com/en/US/docs/general/whatsnew/whatsnew.html...
  • Page 14 Preface Cisco UCS C240 Server Installation and Service Guide OL-25761-01...

  • Page 15: Chapter 1 Overview

    The server is orderable in three different versions, each with one of three different front panel/backplane configurations: Cisco UCS C240 (small form-factor (SFF) drives, with 24-drive backplane and expander).  • Holds up to twenty-four 2.5-inch hard drives or solid state drives.
  • Page 16 16-drive backplane or a 24-drive backplane with an expander. When the 16-drive backplane is installed, only the first 16 drive bays are used. Figure 1-1 Cisco UCS C240 Server (Small Form-Factor Drives) Front Panel Features KVM connector  Temperature status LED (used with KVM cable that provides two USB 2.0, one VGA, and one serial connector)
  • Page 17 Large Form-Factor drives version of the server. This version of the server has a 12-drive backplane with an expander. Figure 1-2 Cisco UCS C240 Server (Large Form-Factor Drives) Front Panel Features HDD 1 HDD 2...
  • Page 18 10 PCIe slots on riser 1: VGA video connector PCIe 1—full-height, half-length, x8 lane PCIe 2—full-height, half-length, x16 lane PCIe 3—full-height, half-length, x8 lane Serial port (RJ-45 connector) 11 Rear Identification button/LED USB port – Cisco UCS C240 Server Installation and Service Guide OL-25761-01...

  • Page 19: Summary Of Server Features

    This server supports multi-bit error protection. protection Baseboard BMC, running Cisco Integrated Management Controller (CIMC) firmware. management Depending on your CIMC settings, the CIMC can be accessed through the  1-Gb Ethernet dedicated management port, the 1-Gb Ethernet LOM ports, or a Cisco virtual interface card.
  • Page 20 The server also contains one internal USB port on the motherboard that you can use with a USB thumb drive for additional storage. Cisco Flexible The server can be ordered with up to two optional Cisco Flexible Flash drives (SD Flash drives cards).

  • Page 21: Installing The Server

    Use the statement number provided at the end of each warning to locate its translation in the translated safety warnings that accompanied this device.  Statement 1071 SAVE THESE INSTRUCTIONS Cisco UCS C240 Server Installation and Service Guide OL-25761-01...

  • Page 22: Unpacking And Inspecting The Server

    Model and serial number of the damaged unit • Description of damage • Effect of damage on the installation Figure 2-1 Shipping Box Contents Server Documentation Power cord (optional, up to two) KVM cable Cisco UCS C240 Server Installation and Service Guide OL-25761-01...

  • Page 23: Chapter 2 Installing The Server

    Statement 1074 Caution All Cisco UCS C-Series rack servers are shipped with rail kits and are expected to be rack-mounted. To ensure proper air flow it is necessary to rack the servers using the provided rail kits. Physically placing the units on top of one another or “stacking” without the use of the rail kits blocks the air vents on top of the servers, which could result in overheating, higher fan speeds, and higher power consumption.

  • Page 24: Rack Requirements

    The minimum vertical rack space per server must be two RUs, equal to 3.5 in. (88.9 mm). Equipment Requirements The slide rails supplied by Cisco Systems for this server do not require tools for installation if you install them in a rack that has square 0.38-inch (9.6 mm), round 0.28-inch (7.1 mm), or #12-24 UNC threaded holes.

  • Page 25: Installing The Server In A Rack

    The smaller #10-32 round mounting pegs are enclosed in the center of the compressible rear – pegs. However, to use the #10-32 pegs, you must use a bladed screwdriver to remove the square/round front pegs. Cisco UCS C240 Server Installation and Service Guide OL-25761-01...
  • Page 26 The inner rails are pre-attached to the sides of the server at the factory. You can order Note replacement inner rails if these are damaged or lost (Cisco PID UCSC-RAIL-2U-I). Align the inner rails that are attached to the server sides with the front ends of the empty slide rails.
  • Page 27 Slide rail assembly on rack post Slide rail locking clip Right-front rack post Optional–If you want to install the cable management arm, continue with Installing the Cable Step 3 Management Arm (Optional), page 2-8. Cisco UCS C240 Server Installation and Service Guide OL-25761-01...

  • Page 28: Installing The Cable Management Arm (Optional)

    Outer CMA tab attached to outer slide rail Rear of right slide rail assembly Inner CMA tab with spring-loaded peg “TOP” stamp on CMA arms facing upward attached to inner rail Cisco UCS C240 Server Installation and Service Guide OL-25761-01...

  • Page 29: Reversing The Cable Management Arm (Optional)

    Orientation for mounting to right slide rail “TOP” stamp on CMA arms Inner CMA tab attaches to CMA arm closest to server Captive thumbscrews on CMA arms Outer CMA tab attaches to CMA arm farthest from server Cisco UCS C240 Server Installation and Service Guide OL-25761-01...

  • Page 30: Initial Server Setup

    DHCP is enabled. Shared LOM EXT mode enables the 1-Gb Ethernet ports and the ports on any installed Cisco virtual interface card (VIC) to access the Cisco Integrated Management Interface (CIMC). If you want to use the dedicated management ports to access the CIMC, you can...
  • Page 31 Cisco card connection is not getting its IP address from a Cisco UCS Manager system because the server is in standalone mode, further DHCP requests from the Cisco card are disabled. Use the Cisco Card NIC mode if you want to connect to the CIMC through a Cisco card in standalone mode.
  • Page 32 The default user name for the server is admin. The default password is password. Note To manage the server, see the Cisco UCS C-Series Rack-Mount Server Configuration Guide or the Cisco UCS C-Series Rack-Mount Server CLI Configuration Guide for instructions on using those interfaces.

  • Page 33: Nic Modes And Nic Redundancy Settings

    LOM and Cisco Card interfaces are both enabled. In this mode, DHCP replies are returned to both the shared LOM ports and the Cisco card ports. If the system determines that the Cisco card connection is not getting its IP address from a Cisco UCS Manager system because the server is in standalone mode, further DHCP requests from the Cisco card are disabled.

  • Page 34: System Bios And Cimc Firmware

    See the Cisco Host Upgrade Utility Quick Reference Guide for your firmware level at the documentation roadmap link below. Your system firmware must be at minimum level 1.2 to use the Cisco Host Upgrade Utility. If Note your firmware is prior to level 1.2, you must use the methods below to update the BIOS and CIMC firmware individually.

  • Page 35: Accessing The System Bios

    Step 6 Follow the instructions on the Exit menu screen to save your changes and exit the setup utility (or Press F10). You can exit without saving changes by pressing Esc. Cisco UCS C240 Server Installation and Service Guide 2-15 OL-25761-01...

  • Page 36: Service Headers And Jumpers

    Figure 2-6 Service Header Locations 3 2 1 SAS1 Riser 1 FAN1 SAS2 FAN2 SAS2 CPU1 SAS1 FAN3 Riser 2 FAN4 FAN5 CPU2 FAN6 J2068 BIOS RCVR BOOT J2065 Clear CMOS Cisco UCS C240 Server Installation and Service Guide 2-16 OL-25761-01...

  • Page 37: Using The Bios Recovery Header J2068

    System would flash the BIOS image now... System would restart with recovered image after a few seconds... Step 6 Wait for server to complete the BIOS update, then remove the USB thumb drive from the server. Cisco UCS C240 Server Installation and Service Guide 2-17 OL-25761-01...
  • Page 38 During the BIOS update, the CIMC will shut down the server and the screen will be blank for Note about 10 minutes. Do not unplug the power cords during this update. The CIMC will power on the server after the update is complete. Cisco UCS C240 Server Installation and Service Guide 2-18 OL-25761-01...

  • Page 39: Procedure 2: Use Recovery Jumper And Recovery.cap File

    Replace the top cover, replace the server in the rack, replace power cords and any other cables, then Step 14 power on the server by pressing the Power button. Cisco UCS C240 Server Installation and Service Guide 2-19 OL-25761-01...

  • Page 40: Using The Clear Cmos Header J2065

    Replace the top cover, replace the server in the rack, replace power cords and any other cables, then Step 11 power on the server by pressing the Power button. Cisco UCS C240 Server Installation and Service Guide 2-20 OL-25761-01...

  • Page 41: Chapter 3 Maintaining The Server

    Server Monitoring and Management Tools Cisco Integrated Management Interface (CIMC) You can monitor the server inventory, health, and system event logs by using the built-in Cisco Integrated Management Controller (CIMC) GUI or CLI interfaces. See the user documentation for your firmware release at the following URL: http://www.cisco.com/en/US/products/ps10739/products_installation_and_configuration_guides_list.html...

  • Page 42: Status Leds And Buttons

    Off—The Ethernet link is idle. • Green—One or more Ethernet LOM ports are link-active, but there is no activity. • Green, blinking—One or more Ethernet LOM ports are link-active, with activity. Cisco UCS C240 Server Installation and Service Guide OL-25761-01...
  • Page 43 Amber—The server is in standby power mode. Power is supplied only to the CIMC • and some motherboard functions. Green—The server is in main power mode. Power is supplied to all server • components. Cisco UCS C240 Server Installation and Service Guide OL-25761-01z...

  • Page 44: Rear Panel Leds And Buttons

    Green, solid—DC power OK, DC outputs OK. • 1-Gb Ethernet dedicated Off—link speed is 10 Mbps. • management link speed Amber—link speed is 100 Mbps. • • Green—link speed is 1 Gbps. Cisco UCS C240 Server Installation and Service Guide OL-25761-01...
  • Page 45 Off—No link is present. • Green—Link is active. • Green, blinking—Traffic is present on the active link. • Identification Off—The Identification LED is not in use. • Blue—The Identification LED is activated. • Cisco UCS C240 Server Installation and Service Guide OL-25761-01z...

  • Page 46: Internal Diagnostic Leds

    DIMM fault LEDs (one next to each DIMM module) socket on the motherboard) Table 3-3 Internal Diagnostic LEDs, Definition of States LED Name State Internal diagnostic LEDs (all) • Off—Component is functioning normally. • Amber—Component has failed. Cisco UCS C240 Server Installation and Service Guide OL-25761-01...

  • Page 47: Preparing For Server Component Installation

    Emergency shutdown—Press and hold the Power button for 4 seconds to force the main power off and immediately enter standby mode. Step 3 Disconnect the power cords from the power supplies in your server to completely power off the server. Cisco UCS C240 Server Installation and Service Guide OL-25761-01z...

  • Page 48: Removing And Replacing The Server Top Cover

    Tighten the captive thumbscrew that secures the rear edge of the cover to the chassis. Figure 3-4 Removing the Top Cover Front cover panel Rubber finger pads (two) Release button Captive thumbscrew Cisco UCS C240 Server Installation and Service Guide OL-25761-01...

  • Page 49: Replaceable Component Locations

    (two, on air baffle not shown in this view) 10 Software RAID 5 key header (SW RAID KEY) The Technical Specifications Sheet for this server, which includes component part numbers, is at: http://www.cisco.com/en/US/prod/collateral/ps10265/ps10493/C240M3_SFF_SpecSheet.pdf. Cisco UCS C240 Server Installation and Service Guide OL-25761-01z...

  • Page 50: Serial Number Location

    (An exception is the drive trays on the front panel, which are hot-swappable but not green). Some replaceable but non-hot-swappable components have light-blue plastic touch-points. • Cisco UCS C240 Server Installation and Service Guide 3-10 OL-25761-01...

  • Page 51: Installing Or Replacing Server Components

    Replacing a PCIe Card, page 3-40 • Installing an NVIDIA GRID or Tesla GPU Card, page 3-47 Replacing a Cisco Flexible Flash Card, page 3-61 • Replacing the LSI RAID Battery Backup Unit or SuperCap Power Module, page 3-65 •...

  • Page 52: Replacing Hard Drives Or Solid State Drives

    The server is orderable in three different versions, each with one of three different front panel/backplane configurations: Cisco UCS C240 (small form-factor (SFF) drives, with 24-drive backplane and expander).  • Holds up to twenty-four 2.5-inch hard drives or solid state drives.

  • Page 53: Drive Replacement Procedure

    With the ejector lever on the drive tray open, insert the drive tray into the empty drive bay. Push the tray into the slot until it touches the backplane, then close the ejector lever to lock the drive in place. Cisco UCS C240 Server Installation and Service Guide 3-13 OL-25761-01z...
  • Page 54 Chapter 3 Maintaining the Server Installing or Replacing Server Components Figure 3-8 Replacing Hard Drives Release button Drive tray securing screws (4) Ejector lever – Cisco UCS C240 Server Installation and Service Guide 3-14 OL-25761-01...

  • Page 55: Replacing A Drive Backplane

    Lift the backplane assembly, including steel tray and any expander card straight up from the chassis and Step 8 set it on an antistatic mat. If your SFF server has the 16-drive backplane, it does not use a SAS expander. Skip to Step Note Cisco UCS C240 Server Installation and Service Guide 3-15 OL-25761-01z...
  • Page 56 Rotate each blue-plastic lever down to the locked position. Stop when the levers click and lock. Step 18 Replace the top cover. Step 19 Replace the server in the rack, replace cables, and then power on the server by pressing the Power button. Cisco UCS C240 Server Installation and Service Guide 3-16 OL-25761-01...
  • Page 57 FAN4 FAN5 CPU2 FAN6 1 Backplane assembly captive thumbscrews (two) 3 Location of motherboard connector  BACKPLANE POWER 1 2 SAS expander cable connectors 4 Fan tray blue-plastic locking levers Cisco UCS C240 Server Installation and Service Guide 3-17 OL-25761-01z...

  • Page 58: Replacing A Sas Expander

    Use a #2 Phillips-head screwdriver to install the two screws that secure the SAS expander to the backplane assembly steel tray (see Figure 3-10). Reconnect SAS cables to the new SAS expander. Step 6 Cisco UCS C240 Server Installation and Service Guide 3-18 OL-25761-01...
  • Page 59 FAN1 SAS2 FAN2 SAS2 CPU1 SAS1 FAN3 Riser 2 FAN4 FAN5 CPU2 FAN6 1 SAS expander securing screws (two) 3 Fan tray blue-plastic locking levers 2 SAS expander cable connectors Cisco UCS C240 Server Installation and Service Guide 3-19 OL-25761-01z...

  • Page 60: Replacing Fan Modules

    (see Figure 3-12). Press down gently on the fan module until the finger-latches click and lock in place. Replace the top cover. Replace the server in the rack. Cisco UCS C240 Server Installation and Service Guide 3-20 OL-25761-01...
  • Page 61 SAS2 CPU1 SAS1 FAN3 Riser 2 FAN4 FAN5 CPU2 FAN6 Finger latches on each fan module Fan module fault LED on each fan module Connector on underside of fan module Cisco UCS C240 Server Installation and Service Guide 3-21 OL-25761-01z...

  • Page 62: Replacing The Motherboard Rtc Battery

    Rotate each blue-plastic lever down to the locked position. Stop when the levers click and lock. Replace the top cover. Replace the server in the rack, replace cables, and power on the server by pressing the Power button. Cisco UCS C240 Server Installation and Service Guide 3-22 OL-25761-01...
  • Page 63 SAS1 Riser 1 FAN1 SAS2 FAN2 SAS2 CPU1 SAS1 FAN3 Riser 2 FAN4 FAN5 CPU2 FAN6 RTC battery holder on motherboard  Fan tray blue-plastic locking levers (under fan tray) Cisco UCS C240 Server Installation and Service Guide 3-23 OL-25761-01z...

  • Page 64: Replacing Dimms

    DIMMs and their sockets are fragile and must be handled with care to avoid damage during installation. Caution Cisco does not support 3rd-party DIMMs. Using non-Cisco DIMMs in the server might result in system problems or damage to the motherboard.
  • Page 65 Fill black #2 slots in the channels second: A2, E2, B2, F2, C2, G2, D2, H2 – Fill black #3 slots in the channels third: A3, E3, B3, F3, C3, G3, D3, H3 Cisco UCS C240 Server Installation and Service Guide 3-25 OL-25761-01z...
  • Page 66 Performance Mode–Prioritizes performance memory operation. If you mix low-voltage DIMMs • with standard DIMMs, the system defaults to this setting. Press F10 to save your changes and exit the setup utility. Step 5 Cisco UCS C240 Server Installation and Service Guide 3-26 OL-25761-01...

  • Page 67: Dimm Replacement Procedure

    To install a DIMM assembly, follow these steps: Remove the DIMMs that you are replacing: Step 1 Power off the server as described in the “Shutting Down and Powering Off the Server” section on page 3-7. Cisco UCS C240 Server Installation and Service Guide 3-27 OL-25761-01z...
  • Page 68 Push down evenly on the top corners of the DIMM until it is fully seated and the ejector levers on both ends lock into place. Replace the top cover. Replace the server in the rack, replace cables, and then power on the server by pressing the Power button. Cisco UCS C240 Server Installation and Service Guide 3-28 OL-25761-01...

  • Page 69: Replacing Cpus And Heatsinks

    Table 3-6, you can install the CPU hardware by using the procedure in this section. If your server’s firmware and/or Cisco UCS Manager software is earlier than the required levels, use • the instructions in the Cisco UCS C-Series Servers Upgrade Guide for Intel E5-2600 v2 Series CPUs to upgrade your firmware.

  • Page 70: Cpu Replacement Procedure

    CPU. Do not attempt this procedure without the required tools, which are included with each CPU option kit. If you do not have the tool, you can order a spare: Cisco PID UCS-CPU-EP-PNP= for 10-, 8-, 6-, 4-, or 2-core CPUs (green); UCS-CPU-EP2-PNP= for v2 12-core CPUs (purple).
  • Page 71 Press the top button on the tool to grasp the installed CPU. Lift the tool and CPU straight up. Press the top button on the tool to release the old CPU on an anti-static surface. Cisco UCS C240 Server Installation and Service Guide 3-31 OL-25761-01z...
  • Page 72 Make sure that the tabs on the tool are fully seated in the slots on the pedestal. Press the side lever on the tool to grasp and lock in the CPU. Lift the tool and CPU straight up off the pedestal. Cisco UCS C240 Server Installation and Service Guide 3-32 OL-25761-01...
  • Page 73 Apply an alcohol-based cleaning solution to the old thermal pad and let it soak for a least 15 seconds. Wipe all of the old thermal pad off the old heatsink using a soft cloth that will not scratch the heatsink surface. Cisco UCS C240 Server Installation and Service Guide 3-33 OL-25761-01z...
  • Page 74 Alternate tightening each screw evenly to avoid damaging the heatsink or CPU. Replace the top cover. Replace the server in the rack, replace cables, and then power on the server by pressing the Power button. Cisco UCS C240 Server Installation and Service Guide 3-34 OL-25761-01...

  • Page 75: Additional Cpu-Related Parts To Order With Rma Replacement Motherboards

    Additional CPU-Related Parts To Order With RMA Replacement Motherboards When a return material authorization (RMA) of the motherboard or CPU is done on a Cisco UCS C-series server, there are additional parts that might not be included with the CPU or motherboard spare bill of materials (BOM).

  • Page 76: Replacing A Mezzanine Card

    Replace the server in the rack, replace cables, and then power on the server by pressing the Power button. If this was a replacement card, continue with Restoring RAID Configuration After Replacing a RAID Controller, page C-24. Cisco UCS C240 Server Installation and Service Guide 3-36 OL-25761-01...
  • Page 77 Maintaining the Server Installing or Replacing Server Components Figure 3-20 Replacing the Mezzanine Card (Shown With PCIe Riser 2 Removed) Mezzanine card connector on motherboard Mezzanine card securing screws (two) Cisco UCS C240 Server Installation and Service Guide 3-37 OL-25761-01z...

  • Page 78: Replacing A Pcie Riser

    How to Determine Your Server Version, page 3-49. The server contains two toolless PCIe risers for horizontal installation of PCIe cards. PCIe riser 2 also includes two internal sockets for Cisco Flexible Flash cards (SD cards). See Replacing a PCIe Card, page 3-40 for specifications of the PCIe slots on the risers.
  • Page 79 Replacing the PCIe Riser SAS1 Riser 1 FAN1 SAS2 FAN2 SAS2 CPU1 SAS1 FAN3 Riser 2 FAN4 FAN5 CPU2 FAN6 PCIe riser 1 alignment slot location PCIe riser 2 alignment slot locations (three) Cisco UCS C240 Server Installation and Service Guide 3-39 OL-25761-01z...

  • Page 80: Replacing A Pcie Card

    Replacing a PCIe Card Caution Cisco supports all PCIe cards qualified and sold by Cisco. PCIe cards not qualified or sold by Cisco are the responsibility of the customer. Although Cisco will always stand behind and support the C-Series rack-mount servers, customers using standard, off-the-shelf, third-party cards must go to the third-party card vendor for support if any issue with that particular third-party card occurs.

  • Page 81: Replacing A Pcie Card

    For the list of supported PCIe adapters and other components, see the Technical Specifications Sheet at Note http://www.cisco.com/en/US/prod/collateral/ps10265/ps10493/C240M3_SFF_SpecSheet.pdf. If you are installing a Cisco UCS Virtual Interface Card, there are prerequisite considerations. See Note Special Considerations for Cisco UCS Virtual Interface Cards, page 3-43.
  • Page 82 PCIe Riser card Retainers (Slot 5 on PCIe Riser 2 Shown) Long card retainer  Securing clip on hinged card retainer (on riser 2, slot 5 only) Card socket on riser Hinged card retainer Cisco UCS C240 Server Installation and Service Guide 3-42 OL-25761-01...

  • Page 83: Special Considerations For Cisco Ucs Virtual Interface Cards

    UCSC-PCIE-C10T-02 1. See PCIe Slots, page 3-40. 2. Slot 5 is not available in single-CPU configurations. 3. The Cisco UCS VIC1225T is not supported for UCS integration at this time. Cisco UCS C240 Server Installation and Service Guide 3-43 OL-25761-01z...

  • Page 84: Special Considerations For Cisco Ucs Fusion Iodrive2 Storage Accelerator Cards

    Installing or Replacing Server Components Special Considerations for Cisco UCS Fusion ioDrive2 Storage Accelerator Cards Table 3-9 describes the requirements for the supported Cisco UCS Fusion ioDrive2 cards. Table 3-9 Cisco UCS C240 Requirements for Fusion ioDrive2 Cards Card Height ...

  • Page 85: Installing Multiple Pcie Cards And Resolving Limited Resources

    ROMs for the onboard NICs to be booted from are enabled in the BIOS Setup Utility. Disable other option ROMs that are not needed to create sufficient memory space for the onboard NICs. Cisco UCS C240 Server Installation and Service Guide 3-45...
  • Page 86 Physically remove any unused PCIe cards. If the system has one or more Cisco virtual interface cards (VICs) installed, disable the PXE boot on the VICs that are not required for the system boot configuration by using the Network Adapters page in the CIMC WebUI to free up some 16-bit I/O resources.

  • Page 87: Installing An Nvidia Grid Or Tesla Gpu Card

    This section includes the following topics: • General NVIDIA GPU Card Configuration Rules, page 3-48 • NVIDIA GRID GPU Slot Population Rules, page 3-48 NVIDIA Tesla GPU Slot Population Rules, page 3-48 • Cisco UCS C240 Server Installation and Service Guide 3-47 OL-25761-01z...
  • Page 88 It is not possible to use dual NVIDIA GPU cards and a Cisco virtual interface card (VIC) at the same time. This is because dual NVIDIA GPUs must be installed in slots 2 and 5 of the server, and a Cisco VIC must be installed in either slot 2 or slot 5.

  • Page 89: How To Determine Your Server Version

    A version ID with “V02” designates version 02 of the server. • Figure 3-25 Label and Version ID PID VID: ||||||||||||||||||||||||||||||||| UCSC-C240-M3S V01 PID/VID label on top of server Version ID on label Cisco UCS C240 Server Installation and Service Guide 3-49 OL-25761-01z...

  • Page 90: Installation Procedures

    • Figure 3-26 Cisco UCS C240 GPU Kit Chassis mid-brace 8-to-8 pin GPU power cable adapter PCIe riser 2 Straight GPU power cable PCIe riser 1 Y GPU power cable Cisco UCS C240 Server Installation and Service Guide 3-50 OL-25761-01...
  • Page 91 3-27). Install the new chassis mid-brace. Set the mid-brace in place while compressing the finger-latches on each end toward the center. Release the latches to lock the mid-brace into position. Cisco UCS C240 Server Installation and Service Guide 3-51 OL-25761-01z...
  • Page 92 Step 4 • If you are installing only one GPU, use the straight GPU power cable. • If you are installing two GPU cards, use the “Y” GPU power cable. Cisco UCS C240 Server Installation and Service Guide 3-52 OL-25761-01...
  • Page 93 Align the GPU card with the socket on the riser, then gently push the card’s edge connector into the socket. Press evenly on both corners of the card to avoid damaging the connector. Cisco UCS C240 Server Installation and Service Guide 3-53...
  • Page 94 Step 7 Install the new PCIe risers: Install any other PCIe cards that you want to install into the new risers. If you are installing a Cisco UCS Virtual Interface Card (VIC), see the slot restrictions in Special Note Considerations for Cisco UCS Virtual Interface Cards, page 3-43.

  • Page 95: Installing The Gpu Card In Version 02 Servers

    Install your first GPU card into PCIe slot 5. See Configuration Rules, page 3-47 when planning which Step 3 slots to use for your card. See Figure 3-32 for the riser and slot locations. Cisco UCS C240 Server Installation and Service Guide 3-55 OL-25761-01z...
  • Page 96 When a GPU card is in slot 2, slot 1 is blocked and unavailable for use. Note Step 5 Install the new PCIe risers: Install any other PCIe cards that you want to install into the new risers. Cisco UCS C240 Server Installation and Service Guide 3-56 OL-25761-01...
  • Page 97 Chapter 3 Maintaining the Server Installing or Replacing Server Components If you are installing a Cisco UCS Virtual Interface Card (VIC), see the slot restrictions in Special Note Considerations for Cisco UCS Virtual Interface Cards, page 3-43. Install riser 2 first. Position the PCIe riser over its socket on the motherboard and over its alignment...
  • Page 98 Replace the server in the rack, replace cables, and then power on the server by pressing the Power Step 10 button. Continue with Installing Drivers to Support the NVIDIA GPU Cards, page 3-59. Step 11 Cisco UCS C240 Server Installation and Service Guide 3-58 OL-25761-01...

  • Page 99: Installing Drivers To Support The Nvidia Gpu Cards

    NVIDIA Tesla K20 1.5(3) 1.5(3) NVIDIA Tesla K20X Install the latest Cisco UCS C240 server BIOS by using the Host Upgrade Utility for the Cisco UCS C240 M3 server. Download the Host Upgrade Utility ISO file as follows: Step 1 Navigate to the following URL: http://www.cisco.com/cisco/software/navigator.html.
  • Page 100 Restart the server. Step 4 Check that the virtual machine is able to recognize the NVIDIA card. In Windows, use the Device Step 5 Manager and look under Display Adapters. Cisco UCS C240 Server Installation and Service Guide 3-60 OL-25761-01...

  • Page 101: Replacing A Cisco Flexible Flash Card

    SD1. The Cisco Flexible Flash card is pre-installed with three software bundles, each on one of four preconfigured virtual drives (VDs). The fourth VD allows you to install an OS or embedded hypervisor.

  • Page 102: Enabling A Cisco Flexible Flash Virtual Drive

    Booting a Cisco Flexible Flash Virtual Drive When you want to access the Cisco SCU or Cisco HUU software, you boot its VD with a one-time boot option. When you want to boot the hypervisor (HV) VD, you boot it with a permanent boot order selection.

  • Page 103: Monitoring And Managing A Cisco Flexible Flash Card

    Monitoring and Managing a Cisco Flexible Flash Card You can monitor and manage your installed Cisco Flexible Flash cards by using the CIMC GUI interface or the CLI interface. See the Cisco UCS C-Series Rack-Mount Server Configuration Guide or the Cisco UCS C-Series Rack-Mount Server CLI Configuration Guide in the documentation roadmap linked below.

  • Page 104: Cisco Flexible Flash Card Replacement Procedure

    Locate the Cisco Flexible Flash card that you are replacing on PCIe riser 2. See Figure 3-36. Push down on the top of the Cisco Flexible Flash card, then release it to allow it to spring up in the slot. Remove the Cisco Flexible Flash card from the slot.

  • Page 105: Replacing The Lsi Raid Battery Backup Unit Or Supercap Power Module

    Connect the cable from the RAID controller to the new backup unit. Replace the top cover. Replace the server in the rack, replace cables, and then power on the server by pressing the Power button. Cisco UCS C240 Server Installation and Service Guide 3-65 OL-25761-01z...
  • Page 106 Chapter 3 Maintaining the Server Replacing a Cisco Flexible Flash Card Figure 3-37 Replacing a BBU or SCPM RAID Backup Unit RAID backup unit mounting points on removable air baffle Cisco UCS C240 Server Installation and Service Guide 3-66 OL-25761-01...

  • Page 107: Installing A Trusted Platform Module

    Log into the BIOS Setup utility with your BIOS Administrator password. On the BIOS Setup utility screen, select the Advanced tab. Select Trusted Computing to open the TPM Security Device Configuration screen. Change TPM SUPPORT to Enabled. Cisco UCS C240 Server Installation and Service Guide 3-67 OL-25761-01z...

  • Page 108: Enabling The Intel Trusted Execution Technology (Txt) Feature For The Tpm

    Likewise, Intel TXT provides for a sealed portion of storage where sensitive data such as encryption keys can be kept, helping to shield them from being compromised during an attack by malicious code. To enable the TXT feature, follow these steps: Cisco UCS C240 Server Installation and Service Guide 3-68 OL-25761-01...
  • Page 109 Watch during bootup for the F2 prompt, and then press F2 to enter BIOS setup. Select the Advanced tab. Select Intel TXT(LT-SX) Configuration and verify that TXT Support, VT-d Support, and VT Support are Enabled. Cisco UCS C240 Server Installation and Service Guide 3-69 OL-25761-01z...

  • Page 110: Replacing A Scu Upgrade Rom Module

    Printed circuit board on module Motherboard header Retention feature on module Retention feature in installed position For more information about using the module and embedded RAID, see Embedded MegaRAID Controller, page C-8. Cisco UCS C240 Server Installation and Service Guide 3-70 OL-25761-01...

  • Page 111: Replacing A Software Raid Key Module

    Printed circuit board on module Motherboard header Retention feature on motherboard header Retention feature in installed position For more information about using the module and embedded RAID, see Embedded MegaRAID Controller, page C-8. Cisco UCS C240 Server Installation and Service Guide 3-71 OL-25761-01z...

  • Page 112: Replacing Power Supplies

    For a DC power supply, push the electrical connector block into the power supply. Note For a DC power supply, see If you shut down the server, press the Power button to return the server to main power mode. Cisco UCS C240 Server Installation and Service Guide 3-72 OL-25761-01...

  • Page 113: Wiring A Dc Power Supply

    Be sure uninsulated conductors are not accessible when cover is in place. Statement 1075 The recommended wire gauge is 8 AWG. The minimum wire gauge is 10 AWG. Note Cisco UCS C240 Server Installation and Service Guide 3-73 OL-25761-01z...
  • Page 114 Step 8 with the power supply label, “+ DC”. Figure 3-42 930 W, –48 VDC Power Supply Connector Block Wire retainer lever Orange plastic button on top of the connector Cisco UCS C240 Server Installation and Service Guide 3-74 OL-25761-01...

  • Page 115: Enabling Or Disabling The Internal Usb Port

    Step 5 Scroll to USB Port: Internal, press Enter, and then select either Enabled or Disabled from the pop-up menu. Press F10 to save and exit the utility. Step 6 Cisco UCS C240 Server Installation and Service Guide 3-75 OL-25761-01z...
  • Page 116 Chapter 3 Maintaining the Server Replacing a Cisco Flexible Flash Card Cisco UCS C240 Server Installation and Service Guide 3-76 OL-25761-01...

  • Page 117: Appendix

    Table A-1 Physical Specifications Description Specification Height 3.4 in. (8.70 cm) Width (including slam-latches) 17.5 in. (44.55 cm) Depth 28.0 in. (71.23 cm) Weight (fully loaded) 60.0 lbs. (27.2 Kg) Cisco UCS C240 Server Installation and Service Guide OL-22326-01...

  • Page 118: Power Specifications

    1200 W AC Power Supply, page A-2 • 930W DC Power Supply, page A-3 • You can get more specific power information for your exact server configuration by using the Cisco UCS Power Calculator: http://www.cisco.com/assets/cdc_content_elements/flash/dataCenter/cisco_ucs_power_calculator/ 650 W AC Power Supply Table A-2 lists the specifications for each 650 W power supply (Cisco part number UCSC-PSU-650W).

  • Page 119: Appendix A Server Specification

    Appendix A Server Specifications Power Specifications 930W DC Power Supply Table A-4 lists the specifications for each 930 W DC power supply (Cisco part number UCSC-PSU-930WDC). Table A-4 930 W DC Power Supply Specifications Description Specification Class RSP1 Input –48 to -60 VDC nominal ...

  • Page 120: Environmental Specifications

    Altitude, non-operating 0 to 40,000 feet Sound power level Measure A-weighted per ISO7779 LwAd (Bels) Operation at 73°F (23°C) Sound pressure level Measure A-weighted per ISO7779 LpAm (dBA) Operation at 73°F (23°C) Cisco UCS C240 Server Installation and Service Guide OL-22326-01...

  • Page 121: Appendix

    Power Cord, 250 VAC 10 A M 2511 Plug Europe SFS-250V-10A-ID Figure B-5 Power Cord, 250 VAC 16A EL-208 Plug South Africa, United Arab Emirates, India SFS-250V-10A-IS Figure B-6 Power Cord, 250 VAC 10 A SI32 Plug  Israel Cisco UCS C22 Server Installation and Service Guide OL-26646-01...

  • Page 122: Supported Power Cords And Plugs

    Cabinet Jumper Power Cord, 250 VAC 10 A, C13-C14 Connectors CAB-C13-C14-2M Figure B-14 Cabinet Jumper Power Cord, 250 VAC 10 A, C13-C14 Connectors CAB-C13-C14-AC Figure B-15 Cabinet Jumper Power Cord, 250 VAC 10 A, C13-C14 Connectors Cisco UCS C22 Server Installation and Service Guide OL-26646-01...

  • Page 123: Appendix B Power Cord Specification

    Cordset rating: 10 A, 250 V/500V Length: 2500mm Connector: Plug: EL 701C EL 206 (IEC 60320/C15) A.S. 3112-2000) Figure B-3 SFS-250V-10A-CN Cordset rating 10A, 250V Plug: (2500 mm) EL 218 (CCEE GB2009) Connector: EL 701 (IEC60320/C13) Cisco UCS C22 Server Installation and Service Guide OL-26646-01...
  • Page 124 Figure B-5 SFS-250V-10A-ID Cordset rating 16A, 250V Plug: (2500mm) EL 208 Connector: EL 701 Figure B-6 SFS-250V-10A-IS Cordset rating 10A, 250V/500V MAX (2500 mm) Connector: EL 701B Plug: (IEC60320/C13) EL 212 (SI-32) Cisco UCS C22 Server Installation and Service Guide OL-26646-01...
  • Page 125 MP232-R Connector: IEC 60320 C15 Figure B-9 CAB-9K10A-UK Cordset rating: 10 A, 250 V/500 V MAX Length: 2500mm Connector: EL 701C Plug: EL 210 (EN 60320/C15) (BS 1363A) 13 AMP fuse Cisco UCS C22 Server Installation and Service Guide OL-26646-01...
  • Page 126 Figure B-11 CAB-N5K6A-NA Cordset rating: 10 A, 250 V Length: 8.2 ft Plug: NEMA 6-15P Connector: IEC60320/C13 Figure B-12 CAB-9K12A-NA Cordset rating 13A, 125V (8.2 feet) (2.5m) Plug: Connector: IEC60320/C15 NEMA 5-15P Cisco UCS C22 Server Installation and Service Guide OL-26646-01...
  • Page 127 CAB-C13-C14-2M, Jumper Power Cord (2 m) Cordset rating 10A, 250V (2.0 m) Connector: Plug: HS10S SS10A Figure B-15 CAB-C13-C14-AC, Jumper Power Cord (3 m) Cordset rating 10A, 250V (3.0 m) Connector: Plug: HS10S SS10A Cisco UCS C22 Server Installation and Service Guide OL-26646-01...
  • Page 128 Appendix B Power Cord Specifications Supported Power Cords and Plugs Cisco UCS C22 Server Installation and Service Guide OL-26646-01...

  • Page 129: Appendix

    RAID Controller Migration, page C-7 Embedded MegaRAID Controller, page C-8 • RAID Controller Cabling, page C-20 • Restoring RAID Configuration After Replacing a RAID Controller, page C-24 • For More Information, page C-24 • Cisco UCS C240 Server Installation and Service Guide OL-25761-01...

  • Page 130: A P P E N D I X C Raid Controller Considerations

    UCSC-RAID-11-C240 LFF/expander: 12 drives, LFF/expander: • • (Includes RAID 5 & 50) 12 internal (kit pair UCSC-CABLE4) SFF/no expander: 8 drives, SFF/no expander: • • 8 internal (kit of 4 UCSC-CABLE2) Cisco UCS C240 Server Installation and Service Guide OL-25761-01...
  • Page 131 3. Embedded RAID SAS drive control requires an optional SCU ROM upgrade chip to be installed on the motherboard. 4. Embedded RAID 5 support requires an optional software key. 5. See LSI Nytro MegaRAID 8110-4i Considerations, page C-4. Cisco UCS C240 Server Installation and Service Guide OL-25761-01...

  • Page 132: Lsi Nytro Megaraid 8110-4I Considerations

    Use either all SAS or all SATA drives in a RAID group. Use the same capacity for each drive in the RAID group. • Never mix HDDs and SSDs in the same RAID group. • Cisco UCS C240 Server Installation and Service Guide OL-25761-01...

  • Page 133: Battery Backup Units

    (SCPMs). The units mount to clips on the removable air baffle (see Figure 3-37). The iBBU09 battery backup unit (BBU) has been phased out by Cisco and replaced with the SuperCap Note power module (SCPM). If you are replacing a BBU, order the SCPM for the replacement (UCS-RAID-CV-SC=).

  • Page 134: Factory-Default Option Rom Settings

    4. You cannot mix controller types in a server. A PCIe-style controller cannot be used when a mezzanine-style controller is used. 5. You cannot mix controller types in a server. A mezzanine-style controller cannot be used when a PCIe-style controller is used. Cisco UCS C240 Server Installation and Service Guide OL-25761-01...

  • Page 135: Raid Controller Migration

    Disable SCU storage support in BIOS. Install card. Install cables. HW RAID Not applicable Not allowed Onboard SCU Storage support is Disabled in BIOS Cisco UCS C240 Server Installation and Service Guide OL-25761-01...

  • Page 136: Embedded Megaraid Controller

    Notes on Supported Embedded MegaRAID Levels, page C-9 • Installing a SCU Upgrade ROM Module For Embedded RAID SAS Support, page C-10 • Installing a Software RAID Key Module for Embedded RAID 5 Support, page C-11 • Cisco UCS C240 Server Installation and Service Guide OL-25761-01...

  • Page 137: Notes On Supported Embedded Megaraid Levels

    For example, you cannot configure a three-drive array into RAID 0 and RAID 5 VDs. Unlike RAID 0, 1, and 5, you cannot create multiple RAID 10 VDs from the same array. A single RAID 10 VD uses up the entire array. Cisco UCS C240 Server Installation and Service Guide OL-25761-01...

  • Page 138: Installing A Scu Upgrade Rom Module For Embedded Raid Sas Support

    Riser 2 FAN4 FAN5 CPU2 FAN6 SCU upgrade ROM header Software RAID 5 key header PCH UPGRD SKU ROM SW RAID KEY (adds SAS drive support) (adds RAID 5 support) Cisco UCS C240 Server Installation and Service Guide C-10 OL-25761-01...

  • Page 139: Enabling The Embedded Raid Controller In The Bios

    Select the Advanced tab, then South Bridge. Step 2 Step 3 Set Onboard SCU Storage Support to Enabled. Step 4 Press F10 to save your changes and exit the utility. Cisco UCS C240 Server Installation and Service Guide C-11 OL-25761-01...

  • Page 140: Disabling The Embedded Raid Controller In The Bios

    This section contains the following topics: Downloading the LSI MegaSR Drivers, page C-13 • • Microsoft Windows Driver Installation, page C-13 • Linux Driver Installation, page C-15 Cisco UCS C240 Server Installation and Service Guide C-12 OL-25761-01...

  • Page 141: Microsoft Windows Driver Installation

    See the following URL: http://www.cisco.com/cisco/software/navigator.html Click Unified Computing and Servers in the middle column. Click Cisco UCS C-Series Rack-Mount Standalone Server Software in the right-hand column. Click your model of server in the right-hand column. Click Unified Computing System (UCS) Drivers.
  • Page 142 Properties. On the Driver tab, click Update Driver to open the Update Device Driver wizard, and then follow the Step 4 wizard instructions to update the driver. Cisco UCS C240 Server Installation and Service Guide C-14 OL-25761-01...

  • Page 143: Linux Driver Installation

    MegaRAID stack. Note The LSI MegaSR drivers that Cisco provides for Red Hat Linux and SUSE Linux are for the original GA versions of those distributions. The drivers do not support updates to those OS kernels. Preparing Physical Installation Diskettes For Linux This section describes how to prepare physical Linux installation diskettes from the driver image files, using either the Windows operating system or the Linux operating system.
  • Page 144 Under Red Hat Linux and SuSE Linux, you can use a driver diskette utility to create disk images from image files. Perform the following steps to create the driver update disk: Download the Cisco UCS C-Series drivers ISO, as described in Downloading the LSI MegaSR Drivers,...
  • Page 145 Diskettes For Linux, page Then return to Step 4 of this procedure. To install from a virtual floppy disk: Download and save the Cisco UCS C-Series drivers ISO, as • C-13.  described in Downloading the LSI MegaSR Drivers, page Then continue with the next step.
  • Page 146 Then return to Step 4 of this procedure. • To install from a virtual floppy disk: Download and save the Cisco UCS C-Series drivers ISO, as C-13.  described in Downloading the LSI MegaSR Drivers, page Then continue with the next step.
  • Page 147 The following message appears: LSI Soft RAID Driver Updates added. Step 15 At the menu, select the driver update medium and press the Back button. Step 16 Continue and complete the installation process by following the prompts. Cisco UCS C240 Server Installation and Service Guide C-19 OL-25761-01...

  • Page 148: Raid Controller Cabling

    RAID Controller Cabling RAID Controller Cabling This section includes the following topics: Cable Routing, page C-20 • Cisco UCS C240 Server Cabling Instructions, page C-21 • Cable Routing The RAID controller connectors in this server are shown in Figure C-2. The red line indicates the recommended cable routing path from the backplane to the possible controller locations.

  • Page 149: Cisco Ucs C240 Server Cabling Instructions

    The server is orderable in three different versions, each with one of three different front panel/backplane configurations: Cisco UCS C240 (small form-factor (SFF) drives, with 24-drive backplane and expander).  • Holds up to twenty-four 2.5-inch hard drives or solid state drives.

  • Page 150: Sff 16-Drive Backplane, No Expander

    Connect cable 1 from the second card SAS1 connector to the SAS3 connector on the backplane. Connect cable 2 from the second card SAS2 connector to the SAS4 connector on the backplane. Cisco UCS C240 Server Installation and Service Guide C-22...

  • Page 151: Lff 12-Drive Backplane With Expander

    Connect cable 1 from connector SAS1 on the card to the SAS1 connector on the expander. Connect cable 2 from connector SAS2 on the card to the SAS2 connector on the expander. Cisco UCS C240 Server Installation and Service Guide C-23...

  • Page 152: Restoring Raid Configuration After Replacing A Raid Controller

    For more information about using the Embedded MegaRAID software to configure your disk arrays, see LSI Embedded MegaRAID Software User Guide. Full LSI documentation is also available: LSI MegaRAID SAS Software User’s Guide (for LSI MegaRAID) • http://www.cisco.com/en/US/docs/unified_computing/ucs/3rd-party/lsi/mrsas/userguide/LSI_MR_SAS_SW_UG.pdf Cisco UCS C240 Server Installation and Service Guide C-24 OL-25761-01...
  • Page 153 Appendix C RAID Controller Considerations For More Information LSI SAS2 Integrated RAID Solution User Guide (for LSI SAS 2008) • http://www.cisco.com/en/US/docs/unified_computing/ucs/3rd-party/lsi/irsas/userguide/LSI_IR_SAS_UG.pdf Cisco UCS C240 Server Installation and Service Guide C-25 OL-25761-01...
  • Page 154 Appendix C RAID Controller Considerations For More Information Cisco UCS C240 Server Installation and Service Guide C-26 OL-25761-01...

  • Page 155: Appendix

    The Cisco UCS integration instructions have been moved to the integration guides found here: Cisco UCS C-Series Server Integration with UCS Manager Guides Refer to the guide that is for the version of Cisco UCS Manager that you are using. Cisco UCS C240 Server Installation and Service Guide...

  • Page 156: A P P E N D I X D Installation For Cisco Ucs Integration

    Appendix D Installation for Cisco UCS Integration Cisco UCS C240 Server Installation and Service Guide OL-25761-01...

This manual is also suitable for:

Ucs c240

Table of Contents