Displaying Disc Information On-Screen - Pioneer DVR-5100H Operating Instructions Manual

Getting started
04
Displaying disc information on-
screen
You can display various on-screen information about the
disc loaded or the HDD.
1 Press DISPLAY repeatedly to display/change the
on-screen information.
• Press once to show the HDD and removable disc
(DVD, etc.) activity together. Press again to show the
status of just the currently selected playback/
recording device (HDD or removable disc).
• The on-screen display automatically disappears after
150 minutes.
2 To hide the information display, press DISPLAY
repeatedly until it disappears.
The example displays below are a guide only; actual
displays vary according to the disc loaded, etc.
HDD and removable disc activity display
Press DISPLAY once to see the HDD and removable disc
(DVD, etc.) activity.
The example displays below show high-speed copying
from HDD to DVD, and HDD chase playback.
HDD
Remain 10h35m
Stop
HDD
Remain 10h35m
Chase Play
Rec
34
En
DISPLAY
Rec Mode SP(2h00m/DVD)
DVD-RW Video
Hi-Speed Copy Remain 0h52m
0h08m left
Rec Mode SP(2h00m/DVD)
DVD-RW Video
Remain 0h52m
Stop
Recording time
Relative playback position
Stop display 1
1 2 3 4
Stop
DVD-RW VR Resume
Original FINE (1h00m/DVD)
Finalized
Disc Name : Comedy shows
1 DVD-RW Original / Play List
If a VR mode disc is loaded, this shows whether playback
is currently set to Original or Play List.
During preview playback of the Copy List, this shows
Copy List.
2 Disc type and mode
Shows the disc type (HDD, DVD-R, DVD-RW, CD, etc.),
and the disc mode for recordable DVD, if applicable (VR
or Video).
3 Recording mode and time
Shows the current recording mode (FINE, SP, LP, etc.),
and the total recording time of the disc.
4 Resume
Shows Resume if playback can be resumed from the last
place stopped.
5 Recording time remaining
Shows the approximate recording time left on the disc in
the current recording mode.
6 Preset name and number
Shows the preset name and preset number for the
currently selected channel.
7 Audio mode
Shows the broadcast audio mode for the current channel
preset (Mono, Stereo, etc.).
8 Copy control information
Shows recording restrictions.
9 Disc name
Shows the disc name.
(For CDs, this area shows playable files other than CD
audio tracks; for example, Multi-format: WMA/MP3.)
10 Finalized
Shows Finalized if a recordable DVD is finalized.
11 TV/DVD mode
Shows the current mode of the recorder (see Switching
between TV and DVD on page 30).
5 6 7 8
ABC Pr 1
Stereo
Rem. 0h35m Copy Once
DVD Mode
9 10 11