Logical Tree Window - Bosch VMS Operator's Manual

80 en | User interface
Display the map containing the camera of the selected Image pane
Click to activate that the map of the camera in the selected Image pane is getting the focus.
The map is displayed in the Map window of the Control monitor. If the selected camera is not
configured on any map, the Map window is cleared.
The displayed map is the first found map in the Logical Tree beginning from the root item, that
contains the selected camera.
If a camera sequence is running within the selected Image pane, after each sequence step the
map in the Map window is updated accordingly.
Display tab
Image pane aspect ratio
For each connected monitor select the required aspect ratio for the Image panes in
Operator Client. Use 16:9 for HD cameras. This setting overrides the setting that was made in
Configuration Client for the initial startup of Operator Client.
Display Logical Number
Select to display the logical number of a camera in the Logical Tree.
Audio tab
Playback audio of the selected Image pane
Select to activate audio playback for the video in the selected Image pane.
Multichannel audio playback
Select to enable simultaneous audio playback for all videos displayed in the Image panes.
Alarm and event sound volume:
Move the slider to adjust the sound volume of alarm sounds.
Half Duplex
Select to enable half duplex mode for the Intercom functionality.
Full Duplex
Select to enable full duplex mode for the Intercom functionality.
Playback tab
Allows you to configure where to get playback information for all cameras that are assigned to
an Image pane in Playback Mode. You use this setting when the VRM server is not available.
Primary VRM (default)
Select to enable retrieving recordings from the primary VRM.
Encoder
Select if the VRM server is not available.
12.15

Logical Tree window

Main window >
or
Main window >
Displays the hierarchical structure of all the devices your user group has access to.
If you logged on to an Enterprise Management Server, the server name is displayed as a prefix
to the camera name.
Only an administrator can create or change the Logical Tree in the Configuration Client.
Allows you to drag an item to the following elements of the user interface:
–
2013.07 | V1 | Operator Client
>
>
Camera, map, document to an Image pane
tab
tab
Operator's Manual
Bosch Video Management System
Bosch Sicherheitssysteme GmbH