Job Control; Cancel Print; Job Recovery; Job Time Out - Dell 3010CN Service Manual

10.4 Job Control

10.4.1 Cancel Print

A print job in process can be cancelled at the operation panel.

10.4.2 Job Recovery

When a job fails due to a paper jam, the printer automatically restarts the job after the jammed paper
is removed.

10.4.3 Job Time Out

When job transmission is interrupted for a certain period of time (Time can be changed at the oper-
ation panel and unlimited time can be selected), the print data is deleted as an error.

10.4.4 Secure Print (/Store Print)

When memory is expanded (256MB or more), the printer holds print data, including a user password
(12 digits) specified in the printer driver, user name and document name, in memory. The data is not
printed until the same password, user name and document name are specified at the printer UI. The
user can select whether the data is cleared or not after being printed. The data remains in the printer
as long as it is not cleared. The data is cleared when the printer is turned on/off. The user can omit
entering a password (This is called Store Print).

10.4.5 Proof Print

When memory is expanded (256MB or more), proof print can be selected only when multiple sets of
prints are specified in the pritner driver. The printer prints only the first set of the print data including
a user name and document name specified in the printer driver. Then the user can select whether
the remaining sets are printed or not (the remaining data is cleared) when the same user name and
document name are entered at the printer UI.. The data remains in the printer as long as it is not
cleared. The data is cleared when the printer is turned on/off.

10.4.6 IP Filter

The user can select to accept or reject jobs for the specified IP address. Up to 5 IP addresses can
be specified.
IP filter is available only to LPD and Port9100.
8 – 19
Chapter 8 Printer Specifications