Bosch NDN-921 Installation And Operation Manual page 74

74 en | Advanced Mode
iSCSI Media
If an iSCSI system is selected as the storage medium, a
connection to the desired iSCSI system is needed to set the
configuration parameters.
The storage system selected must be available on the network
and completely set up. Amongst other things, it must have an IP
address and be divided into logical drives (LUN).
1.
2.
3.
Local Media
The supported local recording media is displayed in the storage
overview field.
Activating and Configuring Storage Media
The storage overview displays the available storage media.
Select individual media or iSCSI drives and transfer these to the
Managed storage media list. Activate the storage media in this
list and configure them for storage.
Note:
Each storage medium can only be associated with one user. If a
storage medium is already being used by another user,
decouple the user and connect the drive to the camera. Before
decoupling, make absolutely sure that the previous user no
longer needs the storage medium.
1.
2.
AR18-10-B013 | v1.52 | 2011.06
Enter the IP address of the required iSCSI destination in
the iSCSI IP address field.
If the iSCSI destination is password protected, enter this
into the Password field.
Click the Read button. The connection to the IP address is
established. The Storage overview field displays the
logical drives.
In the Recording media section, click the iSCSI Media or
Local Media tab to display the applicable storage media in
the overview.
In the Storage overview section, double-click the required
storage medium, an iSCSI LUN or one of the other
Installation and Operation Manual
FlexiDomeHD 720p IP Camera
Bosch Security Systems