Closing The Unit - Bosch NDN-921 Installation And Operation Manual

FlexiDomeHD 720p IP Camera
5.6

Closing the unit

When the camera position is set and all adjustments have been
made, close the unit.
1.
2.
3.
4.
5.
6.
Bosch Security Systems
If necessary, remove the adjustment cap from the lens.
Place the inner liner in position aligning its fin with the
bracket on the base.
Place the dome onto the base and rotate until it clips into
place. (If necessary, clean its surface with a soft cloth.)
Place the sealing ring and the trim ring over the dome.
Align the tamper-resistant screws in the trim ring with the
threaded ends in the mounting base.
Use the supplied special screwdriver bit to tighten the
three tamper-resistant screws.
Installation and Operation Manual
Installation | en
AR18-10-B013 | v1.52 | 2011.06
35