Black & Decker BDCf12 Instruction Manual page 10

The LED flashlight has a built in magnet. This allows it to
H
be mounted to steel surfaces. The magnet will hold the
flashlight in most positions as shown in fIGURE h.
20VOLT MAxx**
I
PIVOTING ThE 12 LED LIGhT hOUSING
(fIGURE I)
The LED light housing (5) can be pivoted by lifting it to
different positions within the 180 degree pivot range.
J
The LED flashlight can also be positioned on the handle
and battery ends to provide a greater range of light
coverage as shown in fIGURE J.
10