Table of Contents
Advertisement
5.
Press SELECT to accept your choice.
6.
Press and hold MEMO/REC. Start
speaking after the beep.
7.
Speak within 8 inches from the MIC.
8.
Release MEMO/REC when you finish
speaking.
The unit will playback the greeting for
confirmation.
CHECKING GREETINGS
1.
Use SCROLL UP or DOWN to select
the greeting you want to hear.
2.
Tap PLAY/STOP to start greeting
playback.
3.
Tap PLAY/STOP again to stop
playback.
ERASING GREETINGS
1.
Select the greeting.
2.
Press ERASE.
The unit plays the default greeting for
confirmation of erasure.
P
M
LAYING
ESSAGES
The unit will show the number of total
messages or new messages in the display. It
also shows the message number, date and
time information, caller ID name and
number for each message when available.
BUTTONS AND CONTROLS
PLAY/STOP - tap to hear all messages; to
hear only new messages, press and wait for
beep, then release.
REVIEW - tap to stop playback and start message
from the beginning again; press to reverse through
previous messages
SKIP - tap to stop playback of current message and
start playback of next message; press to advance
quickly through next messages.
ERASE MSG - tap during playback to erase the
current message. The unit will stop playback and
may ask you to confirm your decision.
After you have selected the messages to be erased
and have reached the last message, the unit will
display "Erasing selected message(s).....Please wait..."
To Erase All Old Messages:
Press ERASE MSG while the unit is in Idle mode.
The unit confirms your decision, updates message
count and displays "Erasing selected message(s)....
Please wait...." It may take up to 17 minutes in the
worst case for the unit to complete this task
before it is ready for other operations.
During this task the unit is silent and will not
respond to any key or incoming call.
After new messages have been played, the
display will show the total number of
messages in memory.
A
D
UTO
ISCONNECT
The unit will automatically stop recording
when any phone extension is picked up.
The message recorded prior to this action
will be kept and will increase the message
counter on the display.
A
T
/D
UTO
IME
AY
The unit will record the day, date and time
of each call. It will be shown in the display
when accessing messages from home, but
will be voiced during remote access.
S
TAMP
19
Advertisement
Table of Contents
