Table of Contents
Advertisement
cable. A poor quality parallel cable may affect your
output. A long cable may also cause print
problems. For best results use the 6 foot length
cable supplied with your SuperScript 660plus
printer.
•
A 1.4 MB floppy drive or CD-ROM drive is also
required.
•
Microsoft Windows 95, Windows 3.1, or Windows
for Workgroups 3.11.
Unpacking the Printer
Follow these steps to set up your SuperScript printer.
1.
Open the box and take out the documents the
software diskettes, the toner module, the
photoconductor module, the main feeder, the
parallel printer cable, and the power cord.
2.
Lift out the printer together with the packing
materials and set on a flat, sturdy surface.
Locating the Printer Items
Locate the following items:
•
NEC SuperScript 660plus Printer
•
SuperScript 660plus software kit
•
User's Guide
•
Quick Installation Guide
•
Main feeder
•
Toner module
02 Ch.1 Intro
3
Chapter 1: Introduction
•
Photoconductor module
•
Power cord
•
Parallel printer cable
•
Packing material
Note: Save this User s Guide, the box, and all
packing materials in case the printer needs to be
repacked.
96.9.24, 10:49 AM
Parallel Printer Cable
1—3
Advertisement
Table of Contents
