Advertisement
Available languages
Available languages
2.
Position the back I/O assistant fan to an orientation
where the THE ULTIMATE FORCE logo on the back I/O
fan is facing towards the back I/O shield and the airflow
arrow indicator is pointing towards the motherboard.
3.
Match the two screw holes on the back I/O fan with the
two screw holes on the cover lid and secure it with the
bundled set of two (2) screws for the back I/O assistant
fan.
Ensure that the back I/O assistant fan is oriented to the
proper direction.
4.
Get the adhesive foam then peel off the adhesive's
cover.
5.
Align and attach the adhesive foam to the bottom of the
back I/O assistant fan.
•
Avoid touching the adhesive surface.
•
The adhesive foam is placed to fill the gap
between the motherboard and the fan. It is not
needed if you are installing a 40mm fan.
6.
Align and insert the cover lid with the back I/O assistant
Align and insert the cover lid with the back I/O assistant
fan into the Thermal Armor and secure it with the screw
that you removed in step 1.
Ensure to tuck the fan cable inside the cable corner slot.
7.
Connect the fan cable connector to the assistant fan
(ASST_FAN) header on the motherboard.
Installing.the.Dust.Defenders
The Dust Defenders are designed to prevent dust and small particles from building up in the motherboard's expansion
and memory slots or connectors.
Installing.the.onboard.connector.caps
Install the onboard connector caps into unused SATA or Onboard USB 2.0 connectors on your motherboard.
To support various models, your package may include additional onboard connector caps for your motherboard.
4
eel off the adhesive's
Adhesive
Fan cable corner slot
Advertisement
