Package.contents Check your GRYPHON ARMOR KIT package for the following items: 2 x DIMM slot covers Thermal Armor 1 x Back I/O port cap set 3 x PCIe x16 slot covers (LAN cap, HDMI cap, DVI cap, DP cap, Front USB 3.0 cap)
Page 3
Assembling the Thermal Armor and the TUF Fortifier with your MB To assemble your motherboard with the Thermal Armor and TUF Fortifier: Take the Thermal Armor, the TUF Fortifier and all accessories out of the box. Using the empty box as a base support, place the Thermal Armor upside down on the open box. Ensure that the Thermal Armor is fitted neatly and firmly in the box.
Position the back I/O assistant fan to an orientation where the THE ULTIMATE FORCE logo on the back I/O fan is facing towards the back I/O shield and the airflow arrow indicator is pointing towards the motherboard. Match the two screw holes on the back I/O fan with the two screw holes on the cover lid and secure it with the bundled set of two (2) screws for the back I/O assistant fan.
PCIe x1 slots on your motherboard. Installing.the.back.I/O.caps The GRYPHON ARMOR KIT takes protection to the next level with the back I/O port caps. Refer to the illustrated guide below for the proper placement of back I/O port caps: To support various models, your package may include additional back I/O port caps for your motherboard.
Clean your back I/O dust filter from time to time, especially when it is dirty to ensure optimum airflow. • The back I/O shield is not included in the GRYPHON ARMOR KIT package. Installing.the.Thermistor.cable The Thermistor cable works together with the Thermal Radar 2 utility to allow you to monitor the temperature of selected devices or critical components inside your motherboard.