Pci Configuration Submenus; Pci Device, Slot 1 - Slot 7 Submenus - NEC LC1400 Service & Reference Manual

PCI Configuration Submenus

This submenu should only be changed by qualified technical personnel.
Leave PCI Configuration Submenu at factory-default
settings. This submenu should only be changed by a
technically qualified person.
Feature Choices
PCI Device, Press ENTER.
Embedded SCSI
Devices
Option ROM Enabled
Scan Disabled
Enable Master Enabled
Disabled
Latency Timer Default
0020h
0040h
0060h
0080h
00A0h
00C0h
00E0h

PCI Device, Slot 1 - Slot 7 Submenus

This submenu should only be changed by qualified technical personnel.
Leave PCI Device Submenu at factory-default settings.
This submenu should only be changed by a technically
qualified person.
Feature Choices
Enable Master Enabled
Disabled
Latency Timer Default
020h
040h
060h
080h
0A0h
0C0h
0E0h
3-8 Configuring Your System
CAUTION
PCI Configuration Submenu
Description
N/A
Enables option ROM scan of the selected
device. Used to enable embedded Symbios
SCSI controller
Enabled selects the device as a PCI bus
master.
Minimum guaranteed time, in units of PCI bus
clocks, that a device may be master on a PCI
bus. Caution: Do not change this setting
unless you fully understand the priority of this
device on the PCI bus.
CAUTION
PCI Device, Slot 1 - Slot 7 Submenu
Description
Enables selected device as a PCI bus
master.
Minimum guaranteed time, in units of PCI
bus clocks, that a device may be master on
a PCI bus. Caution: Do not change this
setting unless you fully understand the
priority of this device on the PCI bus.
Your Setting
Your Setting