Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Baumatic BR110
Summary of Contents for Baumatic BR110
- Page 1 BR110 102 Litres Built under freezer...
- Page 2 USER MANUAL FOR YOUR BAUMATIC BR110, 102 Litres Built under freezer NOTE : This User Instruction Manual contains important information, including safety & installation points, which will enable you to get the most out of your appliance. Please keep it in a safe place so that it is easily available for future reference.
-
Page 3: Table Of Contents
Important safety information 5 – 6 Specifications of your freezer 7 – 8 Dimensions Description of the appliance Using your Baumatic freezer 9 -11 Before switching on During first use Switching on the appliance and setting the thermostat Control Panel... -
Page 4: Environmental Note
Environmental note Note Before discarding an old appliance, switch off and disconnect it from the power supply. Cut off and render any plug useless. Cut the cable off directly behind the appliance to prevent misuse. This should be undertaken by a competent person. Disable the door lock to make sure that children cannot get stuck inside the appliance. -
Page 5: Important Safety Information
Important safety information Your safety is of the utmost importance to Baumatic. Please make sure that you read this instruction booklet before attempting to install or use the appliance. If you are unsure of any of the information contained in this booklet, please contact the Baumatic Advice Line. - Page 6 Child safety o Packaging material should be kept away from children. o Children should not be allowed to touch the controls or play with the appliance. General safety o Do not pull on the power supply cable to remove the plug from your mains supply socket.
-
Page 7: Specifications Of Your Freezer
Specifications of your freezer Dimensions of appliance Dimensions of aperture* Height: 820 – 870 mm Height: 818 - 870 mm Width: 600 mm Width: 596 mm Depth: 600 mm (min) Depth: 550 mm o Freezer star rating **** o Manual defrost o Adjustable thermostat o Temperature rise warning indicator o Fast freeze switch... -
Page 8: Description Of The Appliance
IMPORTANT: When you install your appliance it is important to bear in mind its climatic rating. In order to find out the climatic rating of your appliance, you should check the rating plate. The rating plate is located on the front left edge of the inside of the fridge. -
Page 9: Using Your Baumatic Freezer
Using your Baumatic freezer Before switching on o Make sure that it has been installed by a suitably qualified person, information contained Baumatic’s installation instructions. o After delivery, wait for eight hours before connecting the appliance to your mains supply. This will allow any refrigerant gasses that may have been disturbed during the transportation process to settle. -
Page 10: Switching On The Appliance And Setting The Thermostat
Switching on the appliance and setting the thermostat You switch on your appliance by connecting it to your mains supply and setting the thermostat. The thermostat control knob is located at the top of the appliance. o The thermostat automatically regulates the temperature inside the freezer, depending what... -
Page 11: Control Panel
Control panel 1. Thermostat control dial. 2. Super freeze switch 3. Power indicator light 4. Temperature warning light 5. Fast freeze indicator light o Power light (Green) - will light up as soon as the appliance is connected to your mains supply. o Fast freeze light (Yellow) - will light up when the fast freeze switch has been activated. -
Page 12: Tips On Freezing
Tips on freezing o Freezer bags, polythene wraps, aluminium foil (extra thick) and special cans for frozen foods are suitable packaging for storing frozen goods in. o Tape, rubber bands or plastic clips are suitable for sealing bags and wrappings. o Before sealing a suitable bag, you should compress the air out of it, as this will help the food to freeze more easily. -
Page 13: Freezing Fresh Food With Fast Freeze
Freezing with fast freeze This function should be used whilst you are freezing fresh food, it will ensure that a powerful supply of cold air enters the freezer compartment. o Press the fast freeze switch (2) and the freezer will start to run continuously at its maximum setting. - Page 14 Cleaning and Maintenance: o Occasionally clean the condenser coils (if present) at the back of the appliance to maintain a high performance level. o Defrost the appliance regularly. A build up of thick ice decreases the efficiency of the appliance. You should defrost whenever the frost reaches 5 mm thickness.
-
Page 15: Cleaning And Maintenance
Cleaning and maintenance WARNING: PLEASE ENSURE THAT YOUR APPLIANCE IS DISCONNECTED FROM YOUR MAINS SUPPLY BEFORE ATTEMPTING TO CLEAN IT. o Do not clean the appliance by pouring water onto it or spraying water over it. o The freezer should be cleaned periodically, using a solution of bicarbonate of soda and lukewarm water. - Page 16 o Whilst defrosting the appliance, the food should be removed from the freezer and wrapped in several layers of paper and stored in a cool place. The foods rise in temperature will shorten its storage life and therefore the food should be used within a relatively short period of time.
-
Page 17: Installation
Installation IMPORTANT: Before installation and usage read all the instructions and make sure that the voltage (V) and the frequency (Hz) indicated on the rating plate are exactly the same as the voltage and frequency in your home. The rating plate can be found on the front left edge of the inside of the freezer. -
Page 18: Positioning
Positioning o It is advisable that your appliance is only installed in a location where the ambient temperature of the room, corresponds with the climate classification that is stated on the rating plate of your appliance. Your appliance may not function correctly if the ambient temperature falls outside of the following ranges. -
Page 19: Reversing The Door Of Your Appliance
Reversing the door of your appliance This procedure MUST be completed before the furniture door is attached. Any parts that you remove from the appliance whilst reversing the door, should be retained for later use. WARNING- Take care when opening the hinges, they are sprung loaded and there is the risk of injury if they close on your hand. - Page 20 Lever off the cover caps (3). o Insert the retaining screws (1) into the opposite side of the appliance from their original position. The se screws should be partially tightened but not fully tightened. o Remove the door retaining screws (2) and then reverse the position of the top and bottom hinge (as shown in the diagram on page 18).
-
Page 21: Aperture Dimensions
perture dimensions The diagram below shows the aperture size that you will need to be ble to install your appliance. o The appliance must be stood on a level floor. You can use the levelling feet to take into account any minor unevenne ss in the floor. - Page 22 Use a spanner to adjust the height of the adjustable feet. o If your aperture has a height of 820 mm, then the adjustable feet should be fully tightened. o If your aperture has a height of 870 m m, then the adjustable feet should be set at a height of 50 mm.
-
Page 23: Fitting The Furniture Door To The Appliance
Fitting the furniture door to the appliance If you need the appliance door to open from the other side, then please reverse the door before commencing t stallation process. (See “Reversing the door” section). ools required:- o Tape measure o Sharp pencil o Small flat bladed screwdriver o Spanner... - Page 24 o Place the mounting bracket (1) on the reverse of the furniture door. o The middle of the mounting bracket should be positioned on the line that you have just drawn. Please no te the position of the mounting bracket in the above drawing, to ensure that you have the mounting bracket the correct way up.
- Page 25 ) Hang the furniture door onto the appliance door, making sure that e brackets on th e mounting bracket locate over the adjusting bolts. c) Use a screwdriver to adjus t the gap on the lower section of the djusting bolts. The gap should be set to approximately 9 mm (as shown in the above drawing).
- Page 26 f) Open the appliance door. o Use a suitably sized drill bit to drill through the holes in the bracket, into the work top. IMPORTANT: The drill bit should be appropriate for the material that your work top is made from. o Secure the bracket to the underside of the worktop, using the screws provided.
-
Page 27: Troubleshooting
Troubleshooting IMPORTANT: If your freezer appears not to be operating properly, before contacting the Customer Care Department, please refer to the checklist belo My freezer does not appear to be working/there is no power to my appliance. o Check that the plug is fully inserted into the power socke o Check that there is power to your mains supply (e.g. - Page 28 Or any installation other than the one specified by Baumatic Ltd. has be en completed. lease refer to the conditions of guarantee that appear on the...
-
Page 29: Baumatic Consumables
BC005 Stainless Steel Cle aner and Protector (250 ml) o BC007 E-Cloth – General Purpose Cloth o BC008 Microwave Cover o order a Baumatic consumable product please call 0123 5437 244 nd quote the product code. You can also order online from shop.baumatic.co.uk... -
Page 30: Technical Data
Technical Da Manufacturer BAUMATIC LTD Model Number B 110 Product Category – Upright Freezer Energy Efficiency Class (1) Annual Energy Consumption (2) 183 kWh Storage Volume Fridge Compartment Storage Volume Freezer 100 litres Compartment Star Rating Frost Free Compartments Temperature Rise Time... -
Page 31: Contact Details
United Kingdom Baumatic Lt Czech Republic Baumatic Buildings, Baumatic CR s.r.o. 6 Bennet Road, Lípovà 665 Reading, Berkshire 460 01 Liberec 4 RG2 0QX Czech Rep ublic United Kingdom +420 483 577 200 Sales Telephone www.baumatic.cz (0118) 933 6900 Sales Fax...