Using The Hp E1368A/69A/70A Modules; Using This Chapter; Microwave Switch Commands - HP E1368A/69A/70A User Manual

Using the HP E1368A/69A/70A Modules

Using This Chapter

Microwave Switch Commands

INIT[:IMM]
OUTP[:STAT] ON
[ROUT:]CLOS <
[ROUT:]CLOS? <
[ROUT:]OPEN <
[ROUT:]SCAN <
TRIG:SOUR BUS|EXT|HOLD|IMM Select the trigger source to advance the scan.
*CLS
*ESE
*RST
*SRE
Chapter 3
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
This chapter uses typical examples to show how to use the Microwave
Switch modules. This chapter contains the following sections:
Microwave Switch Commands . . . . . . . . . . . . . . . . . . . . . . . Page 29
Reset Conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 30
Switching Channels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 31
Scanning Channels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 39
Recalling and Saving States. . . . . . . . . . . . . . . . . . . . . . . . . . Page 43
Detecting Error Conditions . . . . . . . . . . . . . . . . . . . . . . . . . . Page 43
Synchronizing the Microwave Switch. . . . . . . . . . . . . . . . . . Page 45
Querying the Microwave Switch . . . . . . . . . . . . . . . . . . . . . . Page 46
Table 3-1. Microwave Switch Commands in Chapter 3
Command
Starts the scan sequence and closes the first channel in
the
Enables the HP E1300A/E1301A "Trig Out" port to
output pulses.
channel_list
> Close the channels in the
channel_list > Query the state of the channels in the
channel_list > Open the channels in the
channel_list > Closes the channels in the
Clears all switchbox Status Registers.
Enables the Event Status Register.
Sets the hardware and software to a known state.
Enables the Status Register.
Command Description
channel list
.
channel list
channel list
channel list
Using the HP E1368A/69A/70A Modules 29
Chapter 3
.
channel list .
.
one at a time.