Cisco UCS C200 Installation And Service Manual page 58

Installing or Replacing Components
–
–
c. With the ejector lever still open, push the sled into the drive bay until you feel the drive stop against
the backplane.
Press the ejector lever flat until the lock clicks into place.
d.
Figure 3-10
HDD_01
Figure 3-11
1
Release button
2 Ejector lever
Cisco UCS C200 Server Installation and Service Guide
3-18
If you have the LFF version of the server with 3.5-in drives, the four screws install on the bottom
of the sled.
If you have the SFF version of the server with 2.5-in drives, two screws install on each side of
the sled.
Drive Numbering and Physical Orientation, Facing Server Front (Large Form Factor)
HDD_02
Removing and Replacing Hard Drives (Large Form Factor)
1
2
3
HDD_03 HDD_04
Reset
Console PSU MEM CPU
4
3
Hard drive sled, bottom view
4 Securing screws (four)
Chapter 3 Maintaining the Server
OL-20732-02