Management Processor Card (Mpc); Functional Description - Cisco 6200 User Manual

1
Hardware Description
Table 1-6
Specification
External interface
Connector type
Fiber types
Average transmitted power
Average received power
Transmission distances
Wavelength (both modes)
Level 2 protocol
Timing
Internal interface
Internal hardware
Dimensions
(width x height x depth)
Weight
Power consumption

1.4 Management Processor Card (MPC)

The Cisco 6200 is controlled and managed by the MPC.

1.4.1 Functional Description

The MPC performs management and storage tasks for the Cisco 6200 DSLAM. The MPC provides
•
The Cisco IOS command line interface (CLI) for configuration and monitoring
•
An SNMP agent for communicating between the Cisco 6200 and the PC running the Cisco 6200
Manager software
•
Alarm contacts and environmental monitoring of key system resources
•
Line card configuration and fault polling
•
Nonvolatile storage of configuration information
•
Two PCMCIA Flash slots for storage of software images and configuration data
1-18 Cisco 6200 User Guide
NTC STM-1 Specifications
Description
One SDH STM-1 (155 Mbps). Single-mode
(intermediate reach) and multimode STM-1
versions available
SC
• Single mode (up to 15 km)
• Multimode (up to 2 km)
• Single mode: –11.5 dBm
• Multimode: –17 dBm
• Single mode: –28 to –8 dBm
• Multimode: –30 to –14 dBm
• Single mode: up to 15 km (9.2 miles)
• Multimode: up to 2 km (1.2 miles)
1310 nm
ATM
Loop timed
16-bit parallel bus at 10 Mbps (160 Mbps
total throughput)
• Motorola MC68360
• 0.5M of PROM
• 4M of RAM
• Odetics SDH interface
1.5 x 15.75 x 9.75 in
(3.8 x 40.0 x 24.8 cm)
2 lb (0.9 kg)
26W
78-5296-02 10/02/98