Notes - NEC Express5800/320Lb Windows Release Note

1. Click on [Start]-[Administrative Tools]-[Services].
2. Right-click on [Stratus ftServer Maintenance and Diagnostics (MAD)] in the
right pane of the displayed dialog.
3. Select [Restart] from the displayed menu, and restart the service.
Also, in case that the LEDs become abnormal in the system running, follow the
above procedures and confirm that the LEDs light correctly.
13. Cautions for using UP devices
To perform automatic operation using UPS, be sure to specify "Power On" for
the AC-LINK setting in the system BIOS setup. By setting "Power On",
automatic shutdown/startup and automatic recovery after power outage shutdown
can be performed. Set the AC-LINK function in the system BIOS setup menu as
below:
"System Hardware"
For details on how to set the AC-LINK function, see "SYSTEM BIOS ~ SETUP
~" in Chapter 4 "System Configuration" of the User's Guide. The factor setting
is "Last State"; therefore, the configuration must be changed before operations.

Notes

The following are notes for errors during system boot. Please read the notes carefully to
ensure that they are followed, if error occurs.
If STOP error occurs
If a message "STOP:0x0000007B INACCESSIBLE_BOOT_DEVICE" is displayed
and the system cannot boot properly, the Boot Monitoring function (Boot Monitoring
Time-out Period) works and it then tries to reboot changing the boot pair (combination
of CPU module and PCI module).
This function makes it possible that the system can reboot with the other mirrored DISK
when the above "STOP error" possibly caused by temporary errors on the primary
DISK occurs.
Therefore, please wait for the boot monitoring time-out period (10 minutes as default),
if you see this error.
example, Figure 1, on page 16.
If an error occurs during POST
If the system stalls during POST, please wait until the Boot monitoring timer detects
time-out and changes the boot pair as well.
"AC-LINK"
Note:
Please refer to the Boot Pair Change Sequence
Express5800/320Lb System Release Notes 15
"Power On"