Honeywell VISTA-128BPTSIA User Manual page 58

Event Log Procedures (continued)
After the last event has been displayed, the END OF EVENT LOG message appears for
a few seconds, then the system automatically displays the RECENT/COMPLETE mode
select screen again (see step 2).
5. To EXIT the Event Log:
Press [∗] at any time.
ALARM EVENT LOG
TYPE CCC UUU
ALARM EVENT LOG
Displays time and date for zones that has either caused an alarm or has been restored in the
selected partition.
CHECK EVENT LOG
Displays time and date for zones that has caused a trouble or supervisory condition in the
selected partition.
BYPASS EVENT LOG
Displays time and date for zones that has been bypassed in the partition.
OPEN EVENT LOG
Displays time, date and user number or 6-character descriptor for the user, if programmed,
for each arming and disarming of the system for the partition selected.
SYSTEM EVENT LOG
Displays time and date for system problems, such as AC Loss, low battery, etc., regardless of
partition.
ALL EVENT LOG
Displays all categories of events in chronological order.
See your Installer for additional information concerning the event log.
– 58 –
Typical
Category
Select Screen