Honeywell Ademco VISTA-32FB User Manual page 62

Quick Guide To System Functions (cont'd)
FUNCTION PROCEDURE
Delete a User Enter master/manager code.
Press CODE [8].
Enter user no. to be deleted.
Enter master/manager code.
Press 1 (Yes) at prompt.
Control Output Enter security code. Press [#]
Device Enter 71 or 72.
Enter security code. Press [#]
Enter 70.
Enter security code. Press [#]
Enter 77.
Access Control Enter security code. Enter 0.
Enter security code
Press [#]. Enter 73.
Enter security code
Press [#]. Enter 74.
Enter access point number.
Enter security code. Press [#].
Enter 75. Enter access point
number.
Enter state (1-3)
Enter security code
Press [#]. Enter 79.
– 62 –
COMMENTS
Master & Manager level users can delete users.
A user can only be deleted by a user with
higher authority level.
Activate output device as programmed.
Activate output device manually
Activate output device or system event instantly
Activate access relay for current partition.
Request to enter or exit at a console.
Request to enter or exit at an access point.
Change the access point state.
Perform an access control card function.