Honeywell RTH6500WF Wi-Fi Series User Manual page 16

Installing your thermostat
Wiring (conventional system)
7A Wire the Wi-Fi thermostat to your conventional system.
a Starting with the C Wire, match the sticky tag on the
wire to the terminal labels.
You must have a C wire. See page 13.
b Loosen screw, insert wire on inside edge
of terminal, then tighten screw.
c Verify wire is firmly secured by gently
pulling on wire.
d Repeat steps a–c for all other wires.
e Push any excess wire back into the wall
opening after all wires are installed.
f Continue to page 20.
Labels don't match?
wiring key on pages 16–17.
69-2718ES—01
69-2718ES_A.indd 14
See alternate
14
Remove metal jumper
only
if you have both
R and RC wires
K Y2 W2 G W C Y R RC
G O/B C
K L AUX/E Y R RC
Note:
The wiring for your
application might be different
from the wiring shown above.
8/13/2012 3:00:15 PM
CONVENTIONAL
HEAT PUMP
MCR33878