Display - Honeywell HSVR-04 User Manual

Understanding of Menu Operations and Controls

Display

74
After completing all the setups click Save, and the system will go back to
the previous menu.
For a detailed setup, refer to
51.
Figure 5-19 The PTZ Setup Menu
Display setup interface is shown as below. See
Transparency: Here you can adjust transparency. The value ranges

from 128 to 255.
Channel name: Here you can modify the channel name. System max

support 25-digit (The value may vary due to different series). Please
note all your modification here only applies to DVR local end. You need
to open web or client end to refresh the channel name.
Time display: You can select to display time or not when system is in

playback.
Channel display: You can select to channel the name or not when

system is in playback.
Resolution: Set VGA and HDMI output resolution, 1280x720 (720p) is

recommended for HDMI output.
Enable tour: Activate tour function.

Preset/Tour/Pattern/Scan Operations
Figure
on page
5-20.