Honeywell HZ432 TrueZONE Installation Manual page 13

Press the Mode button until the Wireless LED lights
up. The TrueZONE must be configured for wireless
4
devices to select Wireless mode.
Press Next to add devices.
While the display alternates the Press Connect and
Exit screens, push the Connect button(s) on the wire-
less device(s).
-OR-
Follow the instructions that came with the wireless
device(s).
Press Next to exit.
If using more than 4 zones, use the TAZ-4 Add-A-Zone
Control Panel. Follow instructions with the TAZ-4 for
5
installation (form 69-1366).
Note: If using a wireless device, a maximum of 4 zones
may be configured.
CONNECT WirElEss DEviCEs
WIRELESS
BACK ADJUST SETTING
TM

HZ432 TrueZONE
HOME
CONFIG
CHECK OUT
MODE
NEXT
M28194
Fig. 19
69-298—0