Your Safety - Kenmore 721.88502 Installation Instructions Manual

YOUR SAFETY FIRST
• MAKE SURE YOU HAVE ENOUGH SPACE AND SUPPORT.
- Mount the oven against a flat, vertical wall, so that it is supported by the wall. The wall should be
constructed of minimum 2" x 4" wood studding and 3/8" thick drywall or plaster/lath.
- ATTACH AT LEAST ONE of the two lag screws supporting the oven to a vertical, 2" x 4" wall stud.
- DO NOT mount the microwave oven to an island or peninsula cabinet.
- BE SURE the upper cabinet and rear wall structures are able to support 150 Ibs., plus the weight of any
items you place inside the oven or upper cabinet.
- Locate the oven away from strong draft areas, such as windows, doors, and strong heating vents.
- BE SURE you have enough space. See Figure 4 below for minimum vertical and horizontal clearance.
WARNING A
If you do not mount the oven as instructed, you risk personal injury and/or
property damage.
'i.'ll Grounded Outlet
_( ns de upper cab net)
Power Hole
SupplyCord
30"min.cabinet o pening width *_
L_._
30"min.clearance f rombottom
ofcabinet to cooking surface
or countertop
before installation.
(Use templates included
with installation instructions)
[ .................................................... ........................................................................... _ I...................................................... ...............................................
Figure 4
A CAUTION A
• Before you begin installing the oven, PLACE A PIECE OF THE CARTON OR OTHER HEAVY MATERIAL
(a blanket) over the countertop or cooktop to protect it. Do not use a plastic cover.
Failure to protect these surfaces could result inproperty damage.