Round Hole Racks - Cisco 5512-X Installation Instructions Manual

5

Round Hole Racks

Using a Phillips head screwdriver, remove the square insert from
the rear of the rail. Keep the two Phillips head screws.
Remove the square insert from the front of the rail. Keep the
two Phillips head screws.
C
Align the round hole insert to the rear of the rail, and secure
it with two of the saved screws.
C
Align the round hole insert to the front of the rail over the
hooks, and secure it with two of the saved screws.
See "Attach the Outer Slide Rail to Round and Square Hole
Racks" on page 8.
6