GE JBS03 Owner's Manual page 29

Cleaning the glass cooktop. Ion some m ode sI
GEAppliances.c
!
I
\ i
Clean your cooktop after
each spill. Use CERAIVlA
BRYTE ®Ceramic Cooktop
Cleaner.
Normal Daily Use Cleaning
ONLYuse CERAMABRYTE ® Ceramic Cooktop
Cleaner on the glass cooktop. Other creams
may not be as effective.
To maintain and protect the surface of your
glass cooktop, follow these steps:
[] Before using the cooktop for the first time,
clean it with CERAIVlA BRYTE ® Ceramic
Cooktop Cleaner.This helps protect the
top and makes cleanup easier.
[] Daily use of CERAIVlA BRYTE ® Ceramic
Cooktop Cleanerwill help keep the
cooktop looking new.
r-_ Shakethe cleaning cream well. Apply a
few drops of CERAIVlA BRYTE ® Ceramic
Cooktop Cleaner directly to the cooktop.
[] Use a paper towel or CERAIVlA BRYTE ®
Cleaning Pad for Ceramic Cooktops to
clean the entire cooktop surface.
[] Use a dry cloth or paper towel to
remove all cleaning residue. No need to
rinse.
NOTE: It is very important that you DO NOT
heat the cooktop until it has been cleaned
thoroughly.
iii ii i] _i i ii
Use a CERAMA BRYTE ® Cleaning Pad
for Ceramic Cooktops.
Burned-On Residue
kWARNING:DAMAGEtoyour r-#l
glass surface may occur if you use scrub pods
other than those recommended. [_]
Allow the cooktop to cool.
Spread a few drops of CERAIVlA BRYTE ®
Ceramic Cooktop Cleaner on the entire
burned residue area.
@
Using the included CERAIVlA BRYTE ®
Cleaning Pad for Ceramic Cooktops, rub
the residue area, applying pressure as
needed.
If any residue remains, repeat
the steps listed above as needed.
For additional protection, after all
residue has been removed, polish the
entire surface with CERAIVlA BRYTE ®
Ceramic Cooktop Cleaner and a paper
towel.
The CERAMA BRYTE ® Ceramic
Cooktop Scraper and all
recommended supplies are
available through our Parts
Center. See instructions under "To
Order Parts" section on next page.
NOTE:Do not use a dull or nicked
blade.
Heavy, Burned-On Residue
F71
Allow the cooktop to cool.
Use a single-edge razor blade scraper
at approximately a 45 ° angle against
the glass surface and scrape the soil. It
will be necessary to apply pressure to
the razor scraper in order to remove the
residue.
%
After scraping with the razor scraper,
spread a few drops of CERAMABRYTE ®
Ceramic Cooktop Cleaner on the entire
burned residue area. Use the CERAIVlA
BRYTE ® Cleaning Pad to remove any
remaining residue.
For additional protection, after all
residue has been removed, polish the
entire surface with CERAIVlA BRYTE ®
Ceramic Cooktop Cleaner and a paper
towel.
29