Getting Started; Introduction To Softune Workbench - Fujitsu MB88121 SERIES User Manual

Fujitsu switch user guide

Hide thumbs Also See for MB88121 SERIES:

Table of Contents

5 Getting Started

Make sure Softune Workbench for FR is installed on your PC and the "SK-91F467-

FLEXRAY" or "SK-91F467D-208PFV" is ready to use (power-on (X5), serial connection

(UART4) to COM port of the PC). Refer to Chapter 2 Installation for details on the hardware

and software installation.

Start Softune Workbench. Select <File> <Open Workspace> to load the first example "SK-

91F467-FLEXRAY_test.wsp". All examples can be found in the folder \software\examples on

the starter kit CD-ROM. It is recommended to copy this folder to the local hard-drive. In the

project tree on the left side, you can open the "source"-folder which contains the source-files

registered to this project. A double-click on one of the files will invoke the built-in editor,

which supports syntax-highlighting, tags and various other functions.

SK-91F467-FLEXRAY V1.1

Getting Started

Figure 5-1: Softune Workbench main window

Note:

You may customize the editor by a right-click on the editor

window.

- 45 -

FMEMCU-UG-910017-11

Table of Contents

Mb91460 series Sk-91f467-flexray