Settings And Adjustment When External Equipment Is Connected; Settings For Time Code (Recorder Only) - Sony DVW-M2000 Installation Manual

1-15. Settings and Adjustment when External Equipment is Connected

1-15. Settings and Adjustment when External Equipment is Connected

1-15-1. Settings for Time Code (Recorder Only)

To set the TIME CODE, open the P1 page (TCG/TCR SETTING) on the function screen.
When Editing with an Editor (BVE-2000, etc.) Capable of the 1st Edit
When this unit is used by connecting to an editor, set as follows.
Button Model
F1 HDW
DVW/MSW
F2 HDW
DVW/MSW
F3 HDW
DVW/MSW
When Editing with Direct Machine-to-Machine (VTR to VTR)
n
The setup menu ITEM-610: REGEN CONTROL MODE setting data must be set to "AS&IN".
Button Model
F1 HDW
DVW/MSW
F2 HDW
DVW/MSW
F3 HDW
DVW/MSW
1-26
Item (Display)
TCG SOURCE (TCG)
TCG INT/EXT (TCG)
TCG PRESET/REGEN (PR/RGN)
TCG PRESET/REGEN (TCG)
TCG RUN (RUN)
TCG RUN (RUN)
Item (Display)
TCG SOURCE (TCG)
TCG INT/EXT (TCG)
TCG PRESET/REGEN (PR/RGN)
TCG PRESET/REGEN (TCG)
TCG RUN (RUN)
TCG RUN (RUN)
HDW-2000/M2000/M2000P/S2000/S2000P/M2100/M2100P, DVW-2000/2000P/M2000/M2000P
MSW-2000/A2000/A2000P/M2000/M2000P/M2000E/M2000EP/M2100/M2100P/M2100E/M2100EP
Setting
INT
PRESET
FREE
Setting
INT
PRESET
FREE
REC