Create User Accounts - NETGEAR RNDU4000-100NAS Software Manual

3. Use the drop-down lists and fields to set default parameters for new users.
Note the following:
• Default group for new users. Determines into which group new user accounts are
placed when created. If you have not created any groups, all users are placed in the
users group.
• Private home shares for users. Enabling private home shares creates a share for
each new user account. This share is visible only to that user and the system
administrator. The share is created the first time a user logs in to the ReadyNAS
system. Disable private home shares to prevent home shares from being created for
each user account.
• Default home volume for new users. This setting determines to which volume new
users are assigned. If you are using X-RAID2 mode, this option is disabled, because
X-RAID2 has only one volume. If you are using Flex-RAID and you have only one
volume, this option is disabled.
• Make home shares available over FTP. Enable this option to allow home shares to
be accessed using the FTP file-sharing protocol. Disable this option to prevent home
shares from being access using the FTP file-sharing protocol.
• Recycle Bin for private home shares. This applies only to shares that are accessed
using the CIFS file-sharing protocol. If you enable this, you can also determine how
long files are held in the Recycle Bin before they are permanently deleted and how
large the Recycle Bin can grow.
• Allow users to change their passwords. If you enable this feature, users can
change their own passwords. If you disable it, the ReadyNAS system administrator
must change user passwords. For more information, see
page 69.
• Warn user when disk usage is. Select a percentage from the drop-down list. When
a user's files reach this percentage of quota, an email alert is sent to the user, if you
provided an email address for that user and established a quota for that user.
4. Click the Apply button.
Your settings are saved.

Create User Accounts

You can create user accounts manually or in large batches.
Manually Create User Accounts
You can manually create up to five user accounts at one time.
To create more than five user accounts at one time, you can import a
comma-separated-value (CSV) file. For more information, see
Batches on page 65.
ReadyNAS for Home RAIDiator 4.2
Users and Groups
63
Change User Passwords
Create User Accounts in
on