NETGEAR RNDU4000-100NAS Software Manual page 52

3. Connect to your ReadyNAS system as follows:
• If you are using the AFP file-sharing protocol, enter the following command in the
Server Address field:
afp://<hostname>
• If you are using the CIFS file-sharing protocol, enter the following command in the
Server Address field:
smb://<hostname>
In both cases, <hostname> is the name that you assigned to your ReadyNAS system
or the default hostname if you did not change it.
4. Click the Connect button.
You are prompted to log in to your ReadyNAS system.
5. Enter a user ID and password.
You can log in with administrator or user credentials. If you log in as a user, your access is
limited by the settings configured by the ReadyNAS system administrator.
You are prompted to select a volume. Mac OS X calls your ReadyNAS shares volumes.
6. Select the volume or volumes (share or shares) you want to access and click the OK button.
Finder displays the volume contents in a window.
ReadyNAS for Home RAIDiator 4.2
Shares
52