Dell PowerVault DX6112 Owner's Manual page 117

Error Code Message Information
Action
PSU0003
Message
Details
Action
PSU0006
Message
Details
Action
PSU0016
Message
Details
Action
PSU0031
Message
Details
Action
PSU0032
Message
Details
Action
PSU0033
Message
Remove and reinstall the power supply at the next service window. If
the issue persists, see Getting
The power input for power supply <
The power supply is installed correctly but an input source is not
connected or is not functional.
Verify the input source is attached to the power supply. Verify the
input power is within the operating requirements for the power
supply.
number > type mismatch.
Power supply <
Power supplies should be of the same input type and power rating.
Install matched power supplies and review proper configuration in
this manual.
number > is absent.
Power supply <
The power supply has been removed or has failed.
1. Remove and reinstall the power supply.
2. Check cables and subsystem components in the system for
damage.
3. If the issue persists, see
Cannot communicate with power supply <
The power supply may operate, however power supply monitoring is
degraded. System performance may be degraded.
Remove and reinstall the power supply. If the issue persists, see
Getting Help.
The temperature for power supply <
System performance may be degraded.
Check the system operating environment, including airflow and inlet
temperature. Check system logs for temperature and thermal
component failures.
The temperature for power supply <
allowable range.
Help.
number > is lost.
Getting Help.
number >.
number > is in a warning range.
number > is outside of the
117