Wireless Point-to-Point Configuration
Access Point 1
Access Point 2
Click on the Edit button at the bottom of the screen to change the details of the profile you have
enabled:
Access Point 1
➋
Access Point 2
❶
In each Access Point, in the Wireless
•
Bridge Page, enable Wireless
Bridinging and Repeating and select
❶
the option for Wireless Point-to-
Point Bridge
Make note of the following:
•
MAC Adress of Access Point 1:
➋
MAC Adress of Access Point 2:
• Enter the MAC Adress of Access
Point 2 (
Address field.
• Enter your Network Authentication
details. Make sure the settings you
use here are set identically in both
Access Points.
Enter the MAC Adress of Access
•
Point 1 (
Address field.
• Enter your Network Authentication
details. Make sure the settings you
use here are set identically in both
Access Points.
)
in the Remote MAC
➋
)
in the Remote MAC
❶
❶
➋