Dell TrueMobile 2350 User Manual page 77

Internet DSL or
cable
modem
LAN 1 Local Area
LAN 2 Network
LAN 3
LAN 4
Back to Top
Back Panel
Connector
Power Connect the power adapter to this power port, and then plug the other end of the power cable into
a power outlet.
Reset Use an object, such as a paper clip, to press the button for at least 5 seconds. The Power LED will
be off for a short time and then light up again. You can then release the button to reset the device
to its factory-default settings.
Internet This accepts an RJ-45 connector for connecting the Dell Wireless 2350 Broadband Router to a
xDSL or cable modem
LAN 1 This accepts RJ-45 connectors for connecting up to 4 computers to the Dell Wireless 2350
LAN 2 Broadband Router's 4-port switch. These are the Ethernet connections.
LAN 3
LAN 4
Back to Top
Dell Wireless 2350 Broadband Router.
A steady green light indicates the connection is active (i.e. the Dell Wireless 2350
Broadband Router is connected to a xDSL or cable modem) and blinks with data
activity.
A steady green light indicates the connection is active and blinks with data activity.
Back Panel
Description