D-Link DSM-320 - Wireless Media Player User Manual page 40

The DSM-320 Setup Wizard (continued)
Key (continued)
Keys are defined by entering in a string in HEX (hexadecimal - using characters
0-, A-F) or ASCII (American Standard Code for Information Interchange
– alphanumeric characters) format.
After entering the appropriate wireless settings for your network, use the down
arrow to navigate to the Next button. Press ENTER on the remote control to
proceed to the next screen.
Current Network Settings
Your current network settings are
displayed and can be modified at this
point. DHCP is the default setting.
The DHCP option allows your DHCP
enabled device to assign the IP
configuration to the DSM-320.
DHCP
If your network has a DHCP server
then press the down arrow on the
remote control to navigate to the Next
button. Once the Next button is highlighted, press ENTER on the remote control
to proceed to the next screen.
Static
If using a static IP address, press ENTER on the remote control with Configuration
highlighted. The up arrow and down arrow toggle between the options. Press
ENTER to make a selection. The on-screen keyboard or numbers on the remote
are used to enter your address settings. Be sure to enter a unique IP address
within the same range as the network. After entering the appropriate settings for
your network, use the down arrow to navigate to the Next button. Press ENTER
on the remote control to proceed to the next screen.
Please see the Glossary for an explanation of DHCP and static IP addresses.
Encryption 64-bit
Char-
acter
Length
HEX 10
ASCII 
Character
Example
Length
18FA 
DMODE 1
0
128-bit
Example
FBCDF1001
10
00PIECAKES1