D-Link DSM-320 - Wireless Media Player User Manual page 38

The DSM-320 Setup Wizard (continued)
Select Your Network Connection
The connection type defaults to
Wireless.
Wireless
If using a wireless network,
press the down arrow on the
remote control to navigate to
the Next button. Once the Next
button is highlighted, press
ENTER on the remote control to
proceed to the next screen.
Wired
To select Wired, press the
ENTER button on the remote control while the Connection is highlighted. Press
the up arrow on the remote control to choose Wired. Press ENTER again to
make the selection and then press the down arrow on the remote control to
navigate to the Next button. Once the Next button is highlighted, press ENTER
on the remote control to proceed to the next screen. Skip to the Current Network
Settings screen on page 0.
Select the SSID
Select the SSID (network
identifier) that is being used by
your wireless network. To select
an SSID, press ENTER on the
remote control while the SSID
window is highlighted. Use the
up arrow and down arrow
buttons on the remote control to
navigate through the list. Once
you've highlighted the correct
SSID, press ENTER on the
remote control. Press the down
arrow on the remote control to navigate to the Next button.
The Rescan button will refresh the list of available networks. Use the left arrow
and right arrow to navigate from the Next button to the Rescan button. If you
cannot locate the SSID, select <Manually Enter SSID> and you will be able to
enter it on the next screen.
8