D-Link DCS-7513 User Manual page 38

Section 3: Configuration
Enable PPPoE:
Enable this setting if your network uses PPPoE.
User Name / Password:
Enter the username and password for your PPPoE
account. Re-enter your password in the Confirm
Password field. You may obtain this information from
your ISP.
HTTP Port:
The default port number is 80.
Access Name for Stream 1~3:
The default name is video#.mjpg, where # is the number
of the stream.
HTTPS Port:
You may use a PC with a secure browser to connect to
the HTTPS port of the camera. The default port number
is 443.
Authentication:
Choose to enable or disable RTSP digest encryption.
Digest encryption uses MD5 hashes.
RTSP Port:
The port number that you use for RTSP streaming to
mobile devices, such as mobile phones or PDAs. The
default port number is 554. You may specify the address
of a particular stream. For instance, live1.sdp can be
accessed at rtsp://x.x.x.x/video1.sdp where the x.x.x.x
represents the ip address of your camera.
Enable CoS:
Enabling the Class of Service setting implements a
best-effort policy without making any bandwidth
reservations.
Enable QoS:
Enabling QoS allows you to specify a traffic priority
policy to ensure a consistent Quality of Service during
busy periods. If the Network Camera is connected to a
router that itself implements QoS, the router's settings
will override the QoS settings of the camera.
D-Link DCS-7513 User Manual 38