Function Item List Of Service Utility - Panasonic KV-S2045C Service Manual

9.2.

Function item list of Service Utility

Item
Scanner Status *2
Scanner Information *2
Scanner Counter Update All Counter *2 To update counter values of System Counter, Cleaning roller Counter, and
Clear Counter for
cleaning roller *2
Clear Counter for
replacing roller *2
Scanner Condition Sleep Mode *2
Clean Imprinter *1, *2 To clean an ink jet head of imprinter.
Warning Setting
Set Default
Test LED
Key / Sensor
Sensor Sensitive Level To check sensitive level of each Sensor. (Waiting, Starting Position, Ending)
Feed Motor
Conveyor Motor
Feed
Sleep Mode
CIS LED Level
CIS Black Level
Memory
Adjust Shading
All Position
Individual Position
Other Save Information *2
Note
*1: This item is available only when the optional Imprinter is installed. (KV-S2045C/SU245C Series only)
*2: These items are included in User Utility software.
Remarks
1. Parameter setting by user
2. Status indication
3. Parameter setting by service person
4. Adjustment
5. Diagnosis
6. Maintenance
To indicate scanner status. (Ready or Error or Warning)
To indicate scanner information about Product ID, firmware version, board
revision, SCSI condition (ID No., Terminator), and so on.
Replacing roller Counter.
To clear Counter for cleaning roller to zero after cleaning roller.
To clear Counter for replacing roller to zero after replacing roller.
To set waiting time before entering to the sleep mode.
To set warning timing to clean roller and to replace roller.
To set "sleep mode setting" and "warning timing to clean and to replace roller"
to the default.
To light LED on the front panel with colors changing periodically
(Green — Orange — Red — Green —....)
To do Key or Sensor ON / OFF test.
To check Paper Feed Motor's rotating.
To check Conveyor Motor's rotating.
To check paper feed condition.
To check whether sleep mode function works properly.
To check peak output level after setting CIS LED lighting level each side.
To check black level after setting black off-set level each side.
To execute memory R/W test.
To execute shading correction.
To adjust scanning length, vertical, and horizontal positions for front and back
sides automatically.
1. To execute automatic length, vertical or horizontal position adjustment for
front and back sides, individually.
2. To adjust scanning length, vertical, or horizontal position for front and
back sides manually.
To save scanner and PC information.
61
KV-S2025C Series / KV-SU225C Series / KV-S2045C Series / KV-SU245C Series
Purpose Remarks
2
2
1
1
1
1
6
3
3
5
5
5
5
5
5
5
5
5
5
4
4
4
1