Step 4 : Install Red Hat Enterprise Linux Advanced Platform 5.2 - NEC Express5800/320Fd-LR User Manual

Step 4: Install Red Hat Enterprise Linux Advanced Platform
5.2
In NEC Express5800/ft series, all the internal disks configure RAID1 by software. RAID consists of
pairs of hard disk drives, which are CPU/IO module 0 – Slot 1 and CPU/IO module 1 – Slot 1, Slot
CPU/IO module 0 – Slot 2 and CPU/IO module 1 – Slot 2, and Slot CPU/IO module 0 – Slot 3 and
CPU/IO module 1 – Slot 3.
Follow the steps below to install Red Hat Enterprise Linux Advanced Platform 5.2.
TIPS:
Since it is difficult to change partition layout after installation, it is
recommended to consider partition layout in advance in view of future system
operation.
Turn on NEC Express5800/ft series.
1.
Insert the startup CD-ROM (Disk 1 of 6) into the DVD-ROM drive.
2.
Reset (i.e. press CTRL+ALT+DELETE) or turn off/on the power to restart.
3.
When the boot screen is displayed, press ENTER.
4.
Linux Setup 4-13